CADANT-CMTS-UPCHANNEL-MIB :: cadUpchannelRangingTimingOffset

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCADANT-CMTS-UPCHANNEL-MIBcadUpchannelRangingTimingOffset

cadUpchannelRangingTimingOffset

Module: CADANT-CMTS-UPCHANNEL-MIB

OID (symbolic): CADANT-CMTS-UPCHANNEL-MIB::cadUpchannelRangingTimingOffset

OID (numeric): 1.3.6.1.4.1.4998.1.1.15.3.5.9

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object controls TLV 46.8.2, an offset from the reference channel, to set the Ranging Offset of the burst transmission for the new channel so that bursts arrive at the expected mini-slots time at the CMTS. The units are (1/10.24MHz) = 97.65625 ns. A negative value implies the Ranging Offset is to be decreased, resulting in later times of transmission at the CM. The CMTS MUST include this TLV within the TCC when the Upstream Channel Action is Add or Replace and Initialization Technique has a value of 2, 3 or 4.

What is cadUpchannelRangingTimingOffset?

Configures a timing offset (in units of approximately 97.66 ns) applied during upstream ranging so that burst transmissions arrive at the CMTS at the correct mini-slot time when a modem moves to a new channel. This fine-tuning compensates for propagation delay differences between the reference channel and the new channel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.15.3.5.9
snmpwalk -v2c -c public <target> CADANT-CMTS-UPCHANNEL-MIB::cadUpchannelRangingTimingOffset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.15.3.5.9.1
snmpget -v2c -c public <target> CADANT-CMTS-UPCHANNEL-MIB::cadUpchannelRangingTimingOffset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4998.1.1.15.3.5.9.1 i <value>

Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-CMTS-UPCHANNEL-MIB::cadUpchannelRangingTimingOffset OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4998cadantCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1cadObjectsCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1cadCableCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1.15cadSpectrumCADANT-PRODUCTS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4998.1.1.15.3cadUpchannelMibCADANT-CMTS-UPCHANNEL-MIB
1.3.6.1.4.1.4998.1.1.15.3.5cadUpchannelParamsCADANT-CMTS-UPCHANNEL-MIB
1.3.6.1.4.1.4998.1.1.15.3.5.9cadUpchannelRangingTimingOffsetCADANT-CMTS-UPCHANNEL-MIB