All MIBs › CADANT-CMTS-UPCHANNEL-MIB › cadUpchannelFreqRange
cadUpchannelFreqRange
Module: CADANT-CMTS-UPCHANNEL-MIB
OID (symbolic): CADANT-CMTS-UPCHANNEL-MIB::cadUpchannelFreqRange
OID (numeric): 1.3.6.1.4.1.4998.1.1.15.3.5.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to configure the C4 CMTS to accept upstream frequency ranges that conform with the EuroDOCSIS specifications (5 MHz to 65 MHz), to the extended range used in Japan (5 MHz to 55 MHz), or to the DOCSIS specifications (5 MHz to 42 MHz), or to the Arris extended range (5 MHz to 85 MHz). Changes to upstream frequency and width are verified against this object to ensure the C4 CMTS does not exceed the upstream spectrum limits imposed by this object. Attempting to narrow the upstream frequency spectrum implied by this object will fail if at least a single upstream is configured outside of the range for the new value. It is recommended this object be set during initial system setup.
What is cadUpchannelFreqRange?
Selects the upstream frequency range specification that the CMTS will accept, choosing between standard DOCSIS (5-42 MHz), EuroDOCSIS (5-65 MHz), or the extended Japanese range (5-55 MHz). This ensures the CMTS validates upstream channel frequencies against the correct regional standard.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.15.3.5.6 snmpwalk -v2c -c public <target> CADANT-CMTS-UPCHANNEL-MIB::cadUpchannelFreqRange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.15.3.5.6.1 snmpget -v2c -c public <target> CADANT-CMTS-UPCHANNEL-MIB::cadUpchannelFreqRange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4998.1.1.15.3.5.6.1 i <value>
Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-CMTS-UPCHANNEL-MIB::cadUpchannelFreqRange OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4998 | cadant | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1 | cadObjects | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1 | cadCable | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1.15 | cadSpectrum | CADANT-PRODUCTS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4998.1.1.15.3 | cadUpchannelMib | CADANT-CMTS-UPCHANNEL-MIB |
| 1.3.6.1.4.1.4998.1.1.15.3.5 | cadUpchannelParams | CADANT-CMTS-UPCHANNEL-MIB |
| 1.3.6.1.4.1.4998.1.1.15.3.5.6 | cadUpchannelFreqRange | CADANT-CMTS-UPCHANNEL-MIB |