All MIBs › CADANT-CMTS-UPCHANNEL-MIB › cadIfUpChannelFrequency
cadIfUpChannelFrequency
Module: CADANT-CMTS-UPCHANNEL-MIB
OID (symbolic): CADANT-CMTS-UPCHANNEL-MIB::cadIfUpChannelFrequency
OID (numeric): 1.3.6.1.4.1.4998.1.1.15.3.2.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The center of the frequency band associated with this upstream channel. This object returns 0 if the frequency is undefined or unknown. Minimum permitted upstream frequency is 5,000,000 Hz for current technology. See the associated conformance object for write conditions and limitations.
The legal range may be restricted further, depending on the provisioned width of the channel. For Docsis: 5.1-41.9 MHz for a 200 kHz channel 5.2-41.8 MHz for a 400 kHz channel 5.4-41.6 MHz for a 800 kHz channel 5.8-41.2 MHz for a 1600 kHz channel 6.6-40.4 MHz for a 3200 kHz channel For Euro-Docsis: 5.1-64.9 MHz for a 200 kHz channel 5.2-64.8 MHz for a 400 kHz channel 5.4-64.6 MHz for a 800 kHz channel 5.8-64.2 MHz for a 1600 kHz channel 6.6-63.4 MHz for a 3200 kHz channel
Note that this entry will be read-only if cadIfUpChannelCloneGroupId is nonzero.
What is cadIfUpChannelFrequency?
Reports the center frequency (in Hz) of this upstream channel's frequency band, which is the RF frequency cable modems use when transmitting to the CMTS. A value of 0 indicates the frequency is undefined or not yet configured; the minimum supported frequency for current technology is 5 MHz.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.15.3.2.1.4 snmpwalk -v2c -c public <target> CADANT-CMTS-UPCHANNEL-MIB::cadIfUpChannelFrequency
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.15.3.2.1.4.1 snmpget -v2c -c public <target> CADANT-CMTS-UPCHANNEL-MIB::cadIfUpChannelFrequency.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4998.1.1.15.3.2.1.4.1 i <value>
Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-CMTS-UPCHANNEL-MIB::cadIfUpChannelFrequency OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4998 | cadant | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1 | cadObjects | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1 | cadCable | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1.15 | cadSpectrum | CADANT-PRODUCTS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4998.1.1.15.3 | cadUpchannelMib | CADANT-CMTS-UPCHANNEL-MIB |
| 1.3.6.1.4.1.4998.1.1.15.3.2 | cadIfUpstreamChannelTable | CADANT-CMTS-UPCHANNEL-MIB |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1 | cadIfUpstreamChannelEntry | CADANT-CMTS-UPCHANNEL-MIB |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.4 | cadIfUpChannelFrequency | CADANT-CMTS-UPCHANNEL-MIB |