CADANT-CMTS-IP-VIDEO-MIB :: cadSysIpVideoLinearThreshold

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CADANT-CMTS-IP-VIDEO-MIB › cadSysIpVideoLinearThreshold

cadSysIpVideoLinearThreshold

Module: CADANT-CMTS-IP-VIDEO-MIB

OID (symbolic): CADANT-CMTS-IP-VIDEO-MIB::cadSysIpVideoLinearThreshold

OID (numeric): 1.3.6.1.4.1.4998.1.1.125.1.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This threshold timer parameter sets the watermark against which all IP Video Linear setups will be measured. When a setup exceeds this parameter, then a counter is pegged. For the purpose of this threshold, reception of the request message (Gate-Set in PCMM) begins the setup time and completion of all necessary protocol exchanges at both the CM and network side stops the timer.

What is cadSysIpVideoLinearThreshold?

Sets the maximum allowed setup time (watermark) for linear (broadcast) IP Video service flows; setups exceeding this threshold increment a counter. This allows operators to monitor whether live video channel change requests are being handled within an acceptable time (measured from receipt of the Gate-Set PCMM request).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.125.1.1.3
snmpwalk -v2c -c public <target> CADANT-CMTS-IP-VIDEO-MIB::cadSysIpVideoLinearThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.125.1.1.3.1
snmpget -v2c -c public <target> CADANT-CMTS-IP-VIDEO-MIB::cadSysIpVideoLinearThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4998.1.1.125.1.1.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cadSysIpVideoLinearThreshold.1

Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-CMTS-IP-VIDEO-MIB::cadSysIpVideoLinearThreshold OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4998cadantCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1cadObjectsCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1cadCableCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1.125cadCmtsIpVideoCADANT-PRODUCTS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4998.1.1.125.1cadCmtsIpVideoMibCADANT-CMTS-IP-VIDEO-MIB
1.3.6.1.4.1.4998.1.1.125.1.1cadSysIpVideoCfgCADANT-CMTS-IP-VIDEO-MIB
1.3.6.1.4.1.4998.1.1.125.1.1.3cadSysIpVideoLinearThresholdCADANT-CMTS-IP-VIDEO-MIB