All MIBs › Baytech-MIB-401-4
Category: Vendor: Baytech
Description: Manages Baytech remote power management unit model 401 series, providing outlet control and power consumption monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Baytech-MIB-401-4?
The Baytech-MIB-401-4 module is a vendor-specific MIB from Baytech, a remote power distribution unit (PDU) manufacturer, covering its 401-series intelligent power controllers used to remotely switch and monitor AC outlets in data center racks. It exposes device identity information (firmware revision, serial number, unit name/description) alongside network management configuration such as BOOTP/DHCP, SSH/Telnet access, activity timeout, direct-connect mode, and SNMP read-only/read-write community strings. For monitoring purposes it is used to confirm hardware/software identity and status - firmware version and serial number - and to verify which management protocols and access controls are enabled, important for both operational and security auditing. The visible objects do not show per-outlet power-consumption metering directly, though the wider Baytech MIB family typically extends this with outlet control and load-current tables. It has no notable external MIB dependency beyond Baytech's own private enterprise tree, and is typically deployed in data center and telecom equipment racks where a Baytech PDU remotely controls power to attached servers/network gear. Engineers can download the Baytech-MIB-401-4 file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Baytech-MIB-401-4. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Baytech remote power distribution unit (PDU)
- 401-series power controller
Monitoring Examples
An administrator polling sBTAIdentFirmwareRev and sBTAIdentSerialNumber can confirm exactly which firmware build and hardware unit is deployed at a given rack location, useful when auditing for a known firmware vulnerability. Checking sBTANetworkConfigSSHEnable, sBTANetworkConfigTelnetEnable, and sBTANetworkConfigSNMPReadWriteCommunity reveals whether insecure management protocols or default community strings are still active, an important security posture check. sBTANetworkConfigActivityTimeout shows the configured session idle timeout, and sBTAIdentUnitName lets NMS tools display a human-readable label for the PDU in alert dashboards.
What Can Be Monitored
- firmware revision
- serial number
- unit name
- SSH/Telnet access enablement
- SNMP community strings
- session activity timeout
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Gauge | |
| IpAddress | |
| TimeTicks | |
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF accessViolationConsole | 1.3.6.1.4.1.4779.0.10 | WARNING: Someone has attempted to login via the console with the incorrect password. | ||
| NTF accessViolationNetwork | 1.3.6.1.4.1.4779.0.11 | WARNING: Someone has attempted to login via the network with the incorrect password. | ||
| baytech | 1.3.6.1.4.1.4779 | |||
| btadevices | 1.3.6.1.4.1.4779.1 | |||
| NTF circuitBreakerAlarm | 1.3.6.1.4.1.4779.0.28 | WARNING: Circuit breaker is blown. Argument specifies rpc. | ||
| NTF circuitBreakerAlarmClearTrap | 1.3.6.1.4.1.4779.0.35 | Circuit breaker has been reset. Argument specifies rpc. | ||
| NTF communicationEstablished | 1.3.6.1.4.1.4779.0.2 | INFORMATION: Communication with the unit has been established. Argument is timeTicks when communication was established. | ||
| NTF communicationLost | 1.3.6.1.4.1.4779.0.1 | SEVERE: Communication to the unit has been lost. Steps to reestablish communication are in progress. Argument is timeTicks when communication was lost. | ||
| NTF configChangeOutlet | 1.3.6.1.4.1.4779.0.9 | WARNING: The specified outlet has changed configuration. | ||
| NTF configChangeSensor | 1.3.6.1.4.1.4779.0.44 | WARNING: The specified environmental sensor has changed configuration. | ||
| NTF configChangeSNMP | 1.3.6.1.4.1.4779.0.8 | WARNING: The SNMP configuration has been changed. | ||
| NTF currentThresholdViolation | 1.3.6.1.4.1.4779.0.17 | WARNING: The preset current threshold has been violated. The argument is the rpc index. | ||
| NTF currentThresholdViolationCleared | 1.3.6.1.4.1.4779.0.18 | INFORMATIONAL: A current threshold violation has been cleared. The argument is the rpc index. | ||
| NTF currentUnderThresholdViolation | 1.3.6.1.4.1.4779.0.36 | WARNING: Low current. Argument specifies rpc. | ||
| NTF currentUnderThresholdViolationCleared | 1.3.6.1.4.1.4779.0.37 | INFORMATIONAL: Low current cleared. Argument specifies rpc. | ||
| INT emergencyThreshold | 1.3.6.1.4.1.4779.1.3.5.8.1.5 | INTEGER | read-write | The current level, in tenths of an amp, that will cause a Current Level Emergency trap to be sent if the total current for the associated group if exceeded. Conversely, a Current Level Emergeny Clear trap will be sent whent the total group current falls below the threshold. |
| NTF emergencyThresholdViolation | 1.3.6.1.4.1.4779.0.33 | |||
| NTF emergencyThresholdViolationClear | 1.3.6.1.4.1.4779.0.34 | |||
| NTF errorExecutingSNMPCommand | 1.3.6.1.4.1.4779.0.21 | WARNING: unable to execute SNMP command. String contains reason and command. | ||
| NTF fileTransferComplete | 1.3.6.1.4.1.4779.0.22 | INFORMATIONAL: file transfer to unit complete. | ||
| INT groupCurrent | 1.3.6.1.4.1.4779.1.3.5.8.1.2 | INTEGER | read-only | Current total for all RPCs in group. |
| INT groupCurrentIndex | 1.3.6.1.4.1.4779.1.3.5.8.1.1 | INTEGER | read-only | The index to a group total current. |
| mtrapargs | 1.3.6.1.4.1.4779.3 | |||
| GAU mtrapargsGauge | 1.3.6.1.4.1.4779.3.4 | Gauge | read-only | This OID allows baytech traps to be sent with a Gauge argument that may not be defined in the baytech MIB. A get of this OID will return 0. |
| INT mtrapargsInteger | 1.3.6.1.4.1.4779.3.1 | INTEGER | read-only | This OID allows baytech traps to be sent with an integer argument that may not be defined in the baytech MIB. A get of this OID will return 0. |
| IP mtrapargsIpAddress | 1.3.6.1.4.1.4779.3.2 | IpAddress | read-only | This OID allows bayteh traps to be sent with an IP address argument that may not be defined in the baytech MIB. A get of this OID will return 0.0.0.0. |
| STR mtrapargsString | 1.3.6.1.4.1.4779.3.3 | DisplayString | read-only | This OID allows baytech traps to be sent with an octet string argument that may not be defined in the baytech MIB. A get of this OID will return a NULL string. |
| TIK mtrapargsTimeTicks | 1.3.6.1.4.1.4779.3.5 | TimeTicks | read-only | This OID allows baytech traps to be sent with a TimeTicks argument that may not be defined in the baytech MIB. A get of this OID will return 0. |
| NTF outletLocked | 1.3.6.1.4.1.4779.0.6 | WARNING: The specified RPC outlet has been locked. If sBTAOutletIndex equals zero, then all outlets have been locked. | ||
| NTF outletOff | 1.3.6.1.4.1.4779.0.4 | WARNING: The specified RPC outlet has turned off. If sBTAOutletIndex equals zero, then all outlets have turned off. | ||
| NTF outletOn | 1.3.6.1.4.1.4779.0.3 | WARNING: The specified RPC outlet has turned on. If sBTAOutletIndex equals zero, then all outlets have turned on. | ||
| NTF outletReboot | 1.3.6.1.4.1.4779.0.5 | WARNING: The specified RPC outlet has rebooted. If sBTAOutletIndex equals zero, then all outlets have rebooted. | ||
| NTF outletUnlocked | 1.3.6.1.4.1.4779.0.7 | WARNING: The specified RPC outlet has been unlocked. If sBTAOutletIndex equals zero, then all outlets have been unlocked. | ||
| IP receiverAddress | 1.3.6.1.4.1.4779.1.2.8.4.1.2 | IpAddress | read-write | The IP address of the manager to send traps to. |
| NTF resetModulesComplete | 1.3.6.1.4.1.4779.0.20 | WARNING: A reset modules (RM) command has been completed. | ||
| NTF resetModulesEvent | 1.3.6.1.4.1.4779.0.19 | WARNING: A reset modules (RM) command has been executed. | ||
| NTF rpcFailureAlarm | 1.3.6.1.4.1.4779.0.29 | WARNING: Unable to communicate to an RPC. Argument specifies port number of RPC. | ||
| STR rpcGroup | 1.3.6.1.4.1.4779.1.3.5.8.1.3 | DisplayString | read-write | A character string listing the RPCs, by port index, that will be included in a measurement of total current. For each group, a sum will be periodically computed of currents of all listed RPCs, which will be compared to warning and emergency thresholds, generating appropriate traps as required by transit of a threshold. A maximum of 8 RPCs may be monitored within a group. The RPC must be connected and operating and the corresponding DS74 serial port must be configured for an RPC-SNMP device type to be allowed group membership. |
| INT sBTABreakerIndex | 1.3.6.1.4.1.4779.3.12 | INTEGER | read-only | This is an object which is sent along with a trap to designate a breaker number pertinent to a particular trap. This value will range from 1 to the total number of breakers inside the particular RPC. A get of this OID will return 0. |
| sBTAControl | 1.3.6.1.4.1.4779.1.4 | |||
| INT sBTAControlNumOfLoggedUsers | 1.3.6.1.4.1.4779.1.4.3 | INTEGER | read-only | Number of users logged in via telnet or SSH. |
| INT sBTAControlResetModules | 1.3.6.1.4.1.4779.1.4.2 | INTEGER | read-write | Setting this value to 1 will cause the unit to reset modules simular to the telnet RM command. A get of this OID will return 0. |
| INT sBTAControlResetUnit | 1.3.6.1.4.1.4779.1.4.1 | INTEGER | read-write | Setting this value to 1 will cause the unit to reset. A get of this OID will return 0. |
| IP sBTAControlUserAddress | 1.3.6.1.4.1.4779.1.4.4.1.3 | IpAddress | read-only | The IP address of the user. |
| INT sBTAControlUserConnection | 1.3.6.1.4.1.4779.1.4.4.1.4 | INTEGER | read-only | Type of connection. If unknown, user is logging out or the connection is invalid. |
| INT sBTAControlUserConnModule | 1.3.6.1.4.1.4779.1.4.4.1.5 | INTEGER | read-only | If the user is connected to a module, this value will report the module number connected to. If the value is 0 the user is not connected to a module. |
| INT sBTAControlUserConnPort | 1.3.6.1.4.1.4779.1.4.4.1.6 | INTEGER | read-only | The port number with in a module that the user is connected to. This usually only applies to connections to DS74 serial modules. Intelligent modules connections are always made on port 1. If value is 0 the user is not connected to a module. |
| sBTAControlUserEntry | 1.3.6.1.4.1.4779.1.4.4.1 | not-accessible | The users to get status on. | |
| INT sBTAControlUserIndex | 1.3.6.1.4.1.4779.1.4.4.1.1 | INTEGER | read-only | The index to the user entry. |
| STR sBTAControlUserName | 1.3.6.1.4.1.4779.1.4.4.1.2 | DisplayString | read-only | The username of the user. |
| sBTAControlUserTable | 1.3.6.1.4.1.4779.1.4.4 | not-accessible | A list of users and user information. The number of entries is contained in the sBTAControlNumOfLoggedUsers OID. | |
| INT sBTAControlUserTerminateUser | 1.3.6.1.4.1.4779.1.4.4.1.7 | INTEGER | read-write | Settings this OID to anything but 0 will terminate (log out) the user. A get of this OID will return 0. |
| sBTAEnvironmental | 1.3.6.1.4.1.4779.1.6 | |||
| INT sBTAEnvironmentalAllSensorsStateTrapEnable | 1.3.6.1.4.1.4779.1.6.7 | INTEGER | read-write | State change environmental sensor (ex: contact) trap enable. |
| INT sBTAEnvironmentalAllTemperatureSensorsHiThreshold | 1.3.6.1.4.1.4779.1.6.3 | INTEGER | read-write | Hi Threshold for all temperature sensors. |
| INT sBTAEnvironmentalAllTemperatureSensorsHiThresholdTrapEnable | 1.3.6.1.4.1.4779.1.6.5 | INTEGER | read-write | Hi Threshold trap enable for all temperature sensors. |
| INT sBTAEnvironmentalAllTemperatureSensorsLoThreshold | 1.3.6.1.4.1.4779.1.6.4 | INTEGER | read-write | Lo Threshold for all temperature sensors. |
| INT sBTAEnvironmentalAllTemperatureSensorsLoThresholdTrapEnable | 1.3.6.1.4.1.4779.1.6.6 | INTEGER | read-write | Lo Threshold trap enable for all temperature sensors. |
| sBTAFileTransfer | 1.3.6.1.4.1.4779.1.5 | |||
| INT sBTAFileTransferEnableUpgradeFTPFileTransfer | 1.3.6.1.4.1.4779.1.5.1 | INTEGER | read-write | Setting this OID to enableUpgradeFileTransferDownloadViaFTP (1) will start the FTP server and place the DS72 in upgrade mode. An FTP connection may then be established for the purpose of transmitting a firmware upgrade file. |
| sBTAIdent | 1.3.6.1.4.1.4779.1.1 | |||
| STR sBTAIdentFirmwareRev | 1.3.6.1.4.1.4779.1.1.1 | DisplayString | read-only | An 8 byte ID string identifying the DS72 firmware revision. This value is set at the factory. |
| INT sBTAIdentSerialNumber | 1.3.6.1.4.1.4779.1.1.2 | INTEGER | read-only | A number identifying the serial number of the DS72. This value is set at the factory. |
| STR sBTAIdentUnitName | 1.3.6.1.4.1.4779.1.1.3 | DisplayString | read-write | A 64-character string identifying the name (UnitID) of the DS72. This value is set at the factory to a default of DS72. |
| INT sBTAModuleIndex | 1.3.6.1.4.1.4779.3.6 | INTEGER | read-only | This OID allows baytech traps to be sent with an integer argument that may not be defined in the baytech MIB. This is an index to a specific DS module. Value will equal the slot of the module. A get of this OID will return 0. |
| sBTAModules | 1.3.6.1.4.1.4779.1.3 | |||
| INT sBTAModulesEnvironmentalHiThreshold | 1.3.6.1.4.1.4779.1.6.1.1.6 | INTEGER | read-write | Hi threshold for object. |
| INT sBTAModulesEnvironmentalHiThresholdEn | 1.3.6.1.4.1.4779.1.6.1.1.10 | INTEGER | read-write | Hi threshold enable for object. |
| INT sBTAModulesEnvironmentalLoThreshold | 1.3.6.1.4.1.4779.1.6.1.1.7 | INTEGER | read-write | Lo threshold for object. |
| INT sBTAModulesEnvironmentalLoThresholdEn | 1.3.6.1.4.1.4779.1.6.1.1.11 | INTEGER | read-write | Lo threshold enable for object. |
| INT sBTAModulesEnvironmentalMax | 1.3.6.1.4.1.4779.1.6.1.1.8 | INTEGER | read-write | Max value recorded for object since last reset. |
| INT sBTAModulesEnvironmentalMeasurement | 1.3.6.1.4.1.4779.1.6.1.1.5 | INTEGER | read-only | The measurement or state for the object. |
| INT sBTAModulesEnvironmentalMin | 1.3.6.1.4.1.4779.1.6.1.1.9 | INTEGER | read-write | Min value recorded for object since last reset. |
| INT sBTAModulesEnvironmentalModulesIndex | 1.3.6.1.4.1.4779.1.6.1.1.1 | INTEGER | read-only | Module Index for Environemntal table |
| STR sBTAModulesEnvironmentalName | 1.3.6.1.4.1.4779.1.6.1.1.4 | DisplayString | read-write | The name for the environmental object. |
| sBTAModulesEnvironmentalObjectsEntry | 1.3.6.1.4.1.4779.1.6.1.1 | not-accessible | Status organization by sensor. | |
| sBTAModulesEnvironmentalObjectsTable | 1.3.6.1.4.1.4779.1.6.1 | not-accessible | Allows monitoring of individual outlet strips on RPCs. | |
| INT sBTAModulesEnvironmentalSensorsIndex | 1.3.6.1.4.1.4779.1.6.1.1.2 | INTEGER | read-only | Sensor Index for Environemntal table |
| INT sBTAModulesEnvironmentalStateTrapEn | 1.3.6.1.4.1.4779.1.6.1.1.12 | INTEGER | read-write | Trap enable for environmental sensors with contacts. |
| INT sBTAModulesEnvironmentalType | 1.3.6.1.4.1.4779.1.6.1.1.3 | INTEGER | read-only | Environmental Object Type. |
| sBTAModulesModem | 1.3.6.1.4.1.4779.1.3.7 | |||
| STR sBTAModulesModulesInstalled | 1.3.6.1.4.1.4779.1.3.2 | DisplayString | read-only | A character string listing the modules installed seperated by commas. Each module is identifed by a two digit number indicating the slot. For example 02,03,04,06 means modules 2,3,4 and 6 are installed. |
| INT sBTAModulesNumberOfIntelligentModules | 1.3.6.1.4.1.4779.1.3.4 | INTEGER | read-only | The number of Intelligent Modules installed in the DS Unit. |
| INT sBTAModulesNumberOfModules | 1.3.6.1.4.1.4779.1.3.1 | INTEGER | read-only | Number of modules installed into the DS unit. |
| INT sBTAModulesNumberOfRPCModules | 1.3.6.1.4.1.4779.1.3.5.1 | INTEGER | read-only | The number of DS30 Modules installed in the DS Unit. |
| INT sBTAModulesResetModulesCmd | 1.3.6.1.4.1.4779.1.3.3 | INTEGER | read-only | This command is no longer supported. |
| sBTAModulesRPC | 1.3.6.1.4.1.4779.1.3.5 | |||
| INT sBTAModulesRPCAllOutletsCmd | 1.3.6.1.4.1.4779.1.3.5.2.1.10 | INTEGER | read-write | Turns all outlets on, off or reboot. 0 = off 1 = on 2 = reboot A get will return unknown (6). |
| STR sBTAModulesRPCAllOutletsStatus | 1.3.6.1.4.1.4779.1.3.5.2.1.11 | DisplayString | read-only | Reports status of outlets in a comma deliminated string. 0 = off 1 = on 2 = reboot 3 = locked on 4 = locked off |
| INT sBTAModulesRPCBreakersBreakersIndex | 1.3.6.1.4.1.4779.1.3.5.9.1.2 | INTEGER | read-only | The index into the RPC breaker table. |
| INT sBTAModulesRPCBreakersCircuitBreaker | 1.3.6.1.4.1.4779.1.3.5.9.1.3 | INTEGER | read-only | Status of circuit breaker in power strip. 0=off 1=on. |
| INT sBTAModulesRPCBreakersCurrent | 1.3.6.1.4.1.4779.1.3.5.9.1.4 | INTEGER | read-only | The detected current reading for the power strip. If current measurement is not installed this value will always read 0. |
| INT sBTAModulesRPCBreakersCurrentAlarmThreshold | 1.3.6.1.4.1.4779.1.3.5.9.1.9 | INTEGER | read-write | The current alarm threshold level *10. A value of 105 will set the level to 10.5. |
| sBTAModulesRPCBreakersEntry | 1.3.6.1.4.1.4779.1.3.5.9.1 | not-accessible | Status organization by breaker. | |
| INT sBTAModulesRPCBreakersMaxCurrent | 1.3.6.1.4.1.4779.1.3.5.9.1.5 | INTEGER | read-only | The maximum detected current reading for the power strip. If current measurement is not installed this value will always read 0. |
| INT sBTAModulesRPCBreakersModulesIndex | 1.3.6.1.4.1.4779.1.3.5.9.1.1 | INTEGER | read-only | The index into the RPC table. |
| INT sBTAModulesRPCBreakersPower | 1.3.6.1.4.1.4779.1.3.5.9.1.7 | INTEGER | read-only | The power reading for the power strip. If voltage measurement is not installed this value will always read 0. |
| sBTAModulesRPCBreakersTable | 1.3.6.1.4.1.4779.1.3.5.9 | not-accessible | Allows monitoring of individual outlet strips on RPCs. | |
| INT sBTAModulesRPCBreakersVA | 1.3.6.1.4.1.4779.1.3.5.9.1.8 | INTEGER | read-only | The volt-amps reading for the power strip. If voltage measurement is not installed this value will always read 0. |
| INT sBTAModulesRPCBreakersVoltage | 1.3.6.1.4.1.4779.1.3.5.9.1.6 | INTEGER | read-only | The voltage reading for the power strip. If voltage measurement is not installed this value will always read 0. |
| INT sBTAModulesRPCCircuitBreaker | 1.3.6.1.4.1.4779.1.3.5.2.1.16 | INTEGER | read-only | Status of circuit breaker in power strip. 0=off 1=on. |
| INT sBTAModulesRPCCurrent | 1.3.6.1.4.1.4779.1.3.5.2.1.4 | INTEGER | read-only | The current reading for the power strip. If current measurement is not installed this value will always read 0. |
| INT sBTAModulesRPCCurrentAlarmThreshold | 1.3.6.1.4.1.4779.1.3.5.2.1.12 | INTEGER | read-write | The current alarm threshold level *10. A value of 105 will set the level to 10.5. |
| sBTAModulesRPCCurrentGroupsCurrentEntry | 1.3.6.1.4.1.4779.1.3.5.8.1 | not-accessible | Table of total current measurement by group | |
| sBTAModulesRPCCurrentGroupsCurrentTable | 1.3.6.1.4.1.4779.1.3.5.8 | not-accessible | A list of total current for RPCs in each current group | |
| sBTAModulesRPCEntry | 1.3.6.1.4.1.4779.1.3.5.2.1 | not-accessible | The RPCs to control and get status on. | |
| STR sBTAModulesRPCFirmwareVersion | 1.3.6.1.4.1.4779.1.3.5.2.1.3 | DisplayString | read-only | The firware version of the rpc. |
| STR sBTAModulesRPCGroupCmd | 1.3.6.1.4.1.4779.1.3.5.4 | DisplayString | read-write | A character string listing the outlets that need to be controlled, turned off, or turn on as a group. Command is the first character followed by a space. Valid commads are 0=off,1=on, or 2=reboot. A list follows the command in the format module.outlet. For example 2 2.1,2.12,3.1 will reboot module 2 outlet 2&12 module 3 outlet 1. |
| INT sBTAModulesRPCIndex | 1.3.6.1.4.1.4779.1.3.5.2.1.1 | INTEGER | read-only | The index into the RPC table. Indexes for rpcs attached to ds74 modules are calculate with the following formula: ((module - 2) * 4) + port. For example module 3 port 1 = index 5. |
| INT sBTAModulesRPCLowCurrentThreshold | 1.3.6.1.4.1.4779.1.3.5.2.1.20 | INTEGER | read-write | Low current threshold for this RPC. |
| INT sBTAModulesRPCMaxCurrent | 1.3.6.1.4.1.4779.1.3.5.2.1.5 | INTEGER | read-write | The maximum detected current reading for the power strip. If current measurement is not installed this value will always read 0. Setting this value to 0 will clear the maximum current detected. |
| sBTAModulesRPCModPortEntry | 1.3.6.1.4.1.4779.1.3.5.5.1 | not-accessible | The RPCs to control and get status on. | |
| STR sBTAModulesRPCModPortGroupCmd | 1.3.6.1.4.1.4779.1.3.5.7 | DisplayString | read-write | A character string listing the outlets that need to be rebooted, turned off, or turn on as a group. Command is the first character followed by a space. Valid commads are 0=off,1=on, or 2=reboot. A list follows the command in the format module.port.outlet. For example 2 2.1.1,2.1.12,3.4.1 will reboot module 2 port 1 outlet 2&12 module 3 port 4 outlet 1. |
| sBTAModulesRPCModPortOutletEntry | 1.3.6.1.4.1.4779.1.3.5.6.1 | not-accessible | The outlets to control and get status on. | |
| sBTAModulesRPCModPortOutletTable | 1.3.6.1.4.1.4779.1.3.5.6 | not-accessible | Allows for control of individual outlets. The number of entries is contained in the sBTAModulesRPCOutletTableSize OID. | |
| sBTAModulesRPCModPortTable | 1.3.6.1.4.1.4779.1.3.5.5 | not-accessible | Allows for control of individual outlets and individual RPC modules. The number of entries is contained in the sBTAModulesNumberOfRPCModules OID. | |
| STR sBTAModulesRPCName | 1.3.6.1.4.1.4779.1.3.5.2.1.2 | DisplayString | read-write | The name (unit id) of the rpc. |
| INT sBTAModulesRPCNumberOfBreakers | 1.3.6.1.4.1.4779.1.3.5.2.1.19 | INTEGER | read-only | Number of breakers for this RPC. |
| INT sBTAModulesRPCNumberOfOutlets | 1.3.6.1.4.1.4779.1.3.5.2.1.15 | INTEGER | read-only | Number of outlets for this RPC. This will be the size of outlet table for this RPC index. |
| INT sBTAModulesRPCNumberOfSensors | 1.3.6.1.4.1.4779.1.3.5.2.1.23 | INTEGER | read-only | Number of environmental sensors for this RPC. |
| sBTAModulesRPCOutletEntry | 1.3.6.1.4.1.4779.1.3.5.3.1 | not-accessible | The outlets to control and get status on. | |
| INT sBTAModulesRPCOutletIndex | 1.3.6.1.4.1.4779.1.3.5.3.1.2 | INTEGER | read-only | The index to the outlet entry. |
| INT sBTAModulesRPCOutletModuleIndex | 1.3.6.1.4.1.4779.1.3.5.3.1.1 | INTEGER | read-only | The index to the outlet entry. |
| STR sBTAModulesRPCOutletName | 1.3.6.1.4.1.4779.1.3.5.3.1.4 | DisplayString | read-write | The name of the outlet. Maximum size is 16 characters. |
| INT sBTAModulesRPCOutletState | 1.3.6.1.4.1.4779.1.3.5.3.1.3 | INTEGER | read-write | Getting this variable will return the state of the outlet. Valid return states are unknown, on, off, lockon, lockoff. 0 = off 1 = on 2 = reboot 3 = lockon (outlet is on and no changes are allowed) 4 = lockoff (outlet is off and no changes are allowed) 5 = unlock. |
| sBTAModulesRPCOutletTable | 1.3.6.1.4.1.4779.1.3.5.3 | not-accessible | Allows for control of individual outlets. The number of entries is contained in the sBTAModulesRPCOutletTableSize OID. | |
| INT sBTAModulesRPCOverTempThreshold | 1.3.6.1.4.1.4779.1.3.5.2.1.17 | INTEGER | read-write | The over temperature alarm threshold level *10. A value of 505 will set the level to 50.5. |
| INT sBTAModulesRPCOverVoltageThreshold | 1.3.6.1.4.1.4779.1.3.5.2.1.13 | INTEGER | read-write | The over voltage alarm threshold level *10. A value of 105 will set the level to 10.5. |
| INT sBTAModulesRPCPower | 1.3.6.1.4.1.4779.1.3.5.2.1.7 | INTEGER | read-only | The power reading for the power strip. If power measurement is not installed this value will always read 0. |
| INT sBTAModulesRPCRebootTimeout | 1.3.6.1.4.1.4779.1.3.5.2.1.9 | INTEGER | read-only | The length of off time for automatic reboot sequences. Currently a read-only value set to the fixed reboot timeout. |
| INT sBTAModulesRPCSourceSwitchCount | 1.3.6.1.4.1.4779.1.3.5.2.1.22 | INTEGER | read-only | Count of Voltage Source Switches for this RPC. |
| sBTAModulesRPCTable | 1.3.6.1.4.1.4779.1.3.5.2 | not-accessible | Allows for control of individual outlets and individual RPC modules. | |
| INT sBTAModulesRPCTemperature | 1.3.6.1.4.1.4779.1.3.5.2.1.8 | INTEGER | read-only | The temperature reading for the power strip. Readings are in degrees C. If temperature measurement is not installed this value will always read 0. |
| STR sBTAModulesRPCType | 1.3.6.1.4.1.4779.1.3.5.2.1.24 | DisplayString | read-only | The type of RPC installed at the indexed location. |
| INT sBTAModulesRPCUnderVoltageThreshold | 1.3.6.1.4.1.4779.1.3.5.2.1.14 | INTEGER | read-write | The under voltage alarm threshold level *10. A value of 105 will set the level to 10.5. |
| INT sBTAModulesRPCUnitVA | 1.3.6.1.4.1.4779.1.3.5.2.1.18 | INTEGER | read-only | Total Volt-Amps for this RPC. |
| INT sBTAModulesRPCVoltage | 1.3.6.1.4.1.4779.1.3.5.2.1.6 | INTEGER | read-only | The voltage reading for the power strip. If voltage measurement is not installed this value will always read 0. |
| INT sBTAModulesRPCVoltageSource | 1.3.6.1.4.1.4779.1.3.5.2.1.21 | INTEGER | read-write | Voltage source for this RPC. |
| sBTAModulesSerial | 1.3.6.1.4.1.4779.1.3.6 | |||
| sBTANetworkConfig | 1.3.6.1.4.1.4779.1.2 | |||
| INT sBTANetworkConfigActivityTimeout | 1.3.6.1.4.1.4779.1.2.5 | INTEGER | read-write | A value from 0 to 120. 0 disables activity timeouts. Value represents minutes of non-activity before telnet / SSH sessions are automatically logged out. Default is 0. |
| INT sBTANetworkConfigBootpEnable | 1.3.6.1.4.1.4779.1.2.1 | INTEGER | read-write | Enables/disables bootp. Bootp will not take effect until the unit is reseted. |
| INT sBTANetworkConfigDHCPEnable | 1.3.6.1.4.1.4779.1.2.2 | INTEGER | read-write | Enables/disables DHCP. DHCP will not take effect until the unit is reseted. |
| INT sBTANetworkConfigDirectConnEnable | 1.3.6.1.4.1.4779.1.2.6 | INTEGER | read-write | Enables/disables direct port connection upon login. |
| sBTANetworkConfigRadius | 1.3.6.1.4.1.4779.1.2.9 | |||
| INT sBTANetworkConfigRadiusEnable | 1.3.6.1.4.1.4779.1.2.9.1 | INTEGER | read-write | Enables / disables RADIUS telnet logins. |
| INT sBTANetworkConfigRadiusLocalLogin | 1.3.6.1.4.1.4779.1.2.9.4 | INTEGER | read-write | Enables / disables the use of local (usernames stored in the DS72) logins in the case that both the primary and secondary RADIUS server are not available. |
| IP sBTANetworkConfigRadiusPrimaryServer | 1.3.6.1.4.1.4779.1.2.9.2 | IpAddress | read-write | Ip address of the primary RADIUS server. |
| IP sBTANetworkConfigRadiusSecondaryServer | 1.3.6.1.4.1.4779.1.2.9.3 | IpAddress | read-write | Ip address of the back-up RADIUS server. |
| sBTANetworkConfigSNMP | 1.3.6.1.4.1.4779.1.2.8 | |||
| INT sBTANetworkConfigSNMPNumTrapReceivers | 1.3.6.1.4.1.4779.1.2.8.3 | INTEGER | read-only | The maximum number of managers to send traps to. Currently 4. |
| STR sBTANetworkConfigSNMPReadOnlyCommunity | 1.3.6.1.4.1.4779.1.2.8.1 | DisplayString | read-write | The community name to use for read only access. Maximum len 16 bytes. |
| STR sBTANetworkConfigSNMPReadWriteCommunity | 1.3.6.1.4.1.4779.1.2.8.2 | DisplayString | read-write | The community name to use for read-write access. Maximum len 16 bytes. |
| sBTANetworkConfigSNMPTrapReceiverEntry | 1.3.6.1.4.1.4779.1.2.8.4.1 | not-accessible | Table of managers to send traps to. | |
| sBTANetworkConfigSNMPTrapReceiverTable | 1.3.6.1.4.1.4779.1.2.8.4 | not-accessible | A list of managers to send traps to. The number of entries is given by the value of sBTANetworkConfigSNMPNumTrapReceivers. Maximum number of Trap Receivers is four. | |
| INT sBTANetworkConfigSSHEnable | 1.3.6.1.4.1.4779.1.2.3 | INTEGER | read-write | Enables/disables SSH logins. Disable/enable SSH will take effect after the unit is reseted. |
| INT sBTANetworkConfigTelnetEnable | 1.3.6.1.4.1.4779.1.2.4 | INTEGER | read-write | Enables/disables telnet. |
| sBTANetworkConfigWEB | 1.3.6.1.4.1.4779.1.2.10 | |||
| INT sBTANetworkConfigWebActivityTimeout | 1.3.6.1.4.1.4779.1.2.10.4 | INTEGER | read-write | A value from 0 to 120. 0 disables WEB activity timeouts. Value represents minutes of non-activity before WEB sessions are automatically logged out. Default is 0. |
| INT sBTANetworkConfigWebEnable | 1.3.6.1.4.1.4779.1.2.10.1 | INTEGER | read-write | Enables WEB. |
| INT sBTANetworkConfigWebLoginEnable | 1.3.6.1.4.1.4779.1.2.10.3 | INTEGER | read-write | Enables WEB Login. |
| INT sBTANetworkConfigWebSecureEnable | 1.3.6.1.4.1.4779.1.2.10.2 | INTEGER | read-write | Enables WEB Security. |
| INT sBTAOutletIndex | 1.3.6.1.4.1.4779.3.7 | INTEGER | read-only | This OID allows baytech traps to be sent with an integer argument that may not be defined in the baytech MIB. This is an index to a specific outlet in a DS module. Value is 1 to number of outlets controlled by the ds module. 0 represents all outlets. A get of this OID will return 0. |
| INT sBTAPortIndex | 1.3.6.1.4.1.4779.3.8 | INTEGER | read-only | This OID allows baytech traps to be sent with an integer argument that may not be defined in the baytech MIB. This is an index to a specific outlet in a DS module. Value is 1 to number of outlets controlled by the ds module. 0 represents all outlets. A get of this OID will return 0. |
| INT sBTASensorIndex | 1.3.6.1.4.1.4779.3.11 | INTEGER | read-only | This OID allows baytech traps to be sent with an integer argument that may not be defined in the baytech MIB. This is an index to a specific sensor in a DS module. Value is 1 to number of sensors controlled by the ds module. A get of this OID will return 0. |
| INT sBTASourceSwitchCount | 1.3.6.1.4.1.4779.3.10 | INTEGER | read-only | This OID allows baytech traps to be sent with an integer argument that may not be defined in the baytech MIB. This is the number associated with the number of voltage source transitions in an RPC. Value is 0 to 255, an 8-bit w/rollover count of number of times voltage source has been switched from one source to another. A get of this OID will return 0. |
| INT sBTAVoltageSource | 1.3.6.1.4.1.4779.3.9 | INTEGER | read-write | This OID allows baytech traps to be sent with an integer argument that may not be defined in the baytech MIB. This is the number associated with the voltage source in an RPC. Value is 1 or 2, depending on which voltage source is powering the RPC. A get of this OID will return 0. |
| NTF sensorStateChangeTrap | 1.3.6.1.4.1.4779.0.43 | WARNING: Sensor state (contact, detector, etc) has changed. Arguments specify module, sensor number | ||
| NTF sensorTempThreshHiAlarmClearedTrap | 1.3.6.1.4.1.4779.0.40 | WARNING: Hi threshold alarm cleared. Arguments specify module, sensor number | ||
| NTF sensorTempThreshHiAlarmTrap | 1.3.6.1.4.1.4779.0.39 | WARNING: Hi threshold exceeded. Arguments specify module, sensor number | ||
| NTF sensorTempThreshLoAlarmClearedTrap | 1.3.6.1.4.1.4779.0.42 | WARNING: Lo threshold alarm cleared. Arguments specify module, sensor number | ||
| NTF sensorTempThreshLoAlarmTrap | 1.3.6.1.4.1.4779.0.41 | WARNING: Lo threshold alarm cleared. Arguments specify module, sensor number | ||
| NTF sensorTypeChange | 1.3.6.1.4.1.4779.0.45 | WARNING: The specified environmental sensor is now a different type. | ||
| INT sRPCAllOutletsCmd | 1.3.6.1.4.1.4779.1.3.5.5.1.12 | INTEGER | read-write | Turns all outlets on, off or reboot. 0 = off 1 = on 2 = reboot 3 = lockon (will lock outlets to on state) 4 = lockoff (will lock outlets to off state) 5 = unlock (will unlock all outlets) A get will return unknown (6). |
| STR sRPCAllOutletsStatus | 1.3.6.1.4.1.4779.1.3.5.5.1.13 | DisplayString | read-only | Reports status of outlets in a comma deliminated string. 0 = off 1 = on 2 = reboot 3 = locked on 4 = locked off |
| INT sRPCBreakersBreakersIndex | 1.3.6.1.4.1.4779.1.3.5.10.1.3 | INTEGER | read-only | The breaker index into the RPC breaker table. |
| INT sRPCBreakersCircuitBreaker | 1.3.6.1.4.1.4779.1.3.5.10.1.4 | INTEGER | read-only | Status of circuit breaker in power strip. 0=off 1=on. |
| INT sRPCBreakersCurrent | 1.3.6.1.4.1.4779.1.3.5.10.1.5 | INTEGER | read-only | The detected current reading for the power strip. If current measurement is not installed this value will always read 0. |
| INT sRPCBreakersCurrentAlarmThreshold | 1.3.6.1.4.1.4779.1.3.5.10.1.10 | INTEGER | read-write | The current alarm threshold level x10. A value of 105 will set the level to 10.5. |
| INT sRPCBreakersMaxCurrent | 1.3.6.1.4.1.4779.1.3.5.10.1.6 | INTEGER | read-only | The maximum detected current reading for the power strip. If current measurement is not installed this value will always read 0. |
| INT sRPCBreakersModIndex | 1.3.6.1.4.1.4779.1.3.5.10.1.1 | INTEGER | read-only | The module index into the RPC breaker table. |
| INT sRPCBreakersPortIndex | 1.3.6.1.4.1.4779.1.3.5.10.1.2 | INTEGER | read-only | The port index into the RPC breaker table. |
| INT sRPCBreakersPower | 1.3.6.1.4.1.4779.1.3.5.10.1.8 | INTEGER | read-only | The power reading for the power strip. If voltage measurement is not installed this value will always read 0. |
| INT sRPCBreakersVA | 1.3.6.1.4.1.4779.1.3.5.10.1.9 | INTEGER | read-only | The volt-amps reading for the power strip. If voltage measurement is not installed this value will always read 0. |
| INT sRPCBreakersVoltage | 1.3.6.1.4.1.4779.1.3.5.10.1.7 | INTEGER | read-only | The voltage reading for the power strip. If voltage measurement is not installed this value will always read 0. |
| INT sRPCCircuitBreaker | 1.3.6.1.4.1.4779.1.3.5.5.1.18 | INTEGER | read-only | Status of circuit breaker in power strip. 0=off 1=on. |
| INT sRPCCurrent | 1.3.6.1.4.1.4779.1.3.5.5.1.6 | INTEGER | read-only | The current reading for the power strip. If current measurement is not installed this value will always read 0. |
| INT sRPCCurrentAlarmThreshold | 1.3.6.1.4.1.4779.1.3.5.5.1.14 | INTEGER | read-write | The current alarm threshold level *10. A value of 105 will set the level to 10.5. |
| INT sRPCEnvironmentalHiThreshold | 1.3.6.1.4.1.4779.1.6.2.1.7 | INTEGER | read-write | Hi threshold for object. |
| INT sRPCEnvironmentalHiThresholdEn | 1.3.6.1.4.1.4779.1.6.2.1.11 | INTEGER | read-write | Hi threshold enable for object. |
| INT sRPCEnvironmentalLoThreshold | 1.3.6.1.4.1.4779.1.6.2.1.8 | INTEGER | read-write | Lo threshold for object. |
| INT sRPCEnvironmentalLoThresholdEn | 1.3.6.1.4.1.4779.1.6.2.1.12 | INTEGER | read-write | Lo threshold enable for object. |
| INT sRPCEnvironmentalMax | 1.3.6.1.4.1.4779.1.6.2.1.9 | INTEGER | read-write | Max value recorded for object since last reset. |
| INT sRPCEnvironmentalMeasurement | 1.3.6.1.4.1.4779.1.6.2.1.6 | INTEGER | read-only | The measurement or state for the object. |
| INT sRPCEnvironmentalMin | 1.3.6.1.4.1.4779.1.6.2.1.10 | INTEGER | read-write | Min value recorded for object since last reset. |
| INT sRPCEnvironmentalModuleIndex | 1.3.6.1.4.1.4779.1.6.2.1.1 | INTEGER | read-only | Module Index for Environemntal table |
| STR sRPCEnvironmentalName | 1.3.6.1.4.1.4779.1.6.2.1.5 | DisplayString | read-write | The name for the environmental object. |
| sRPCEnvironmentalObjectsEntry | 1.3.6.1.4.1.4779.1.6.2.1 | not-accessible | Status organization by sensor. | |
| sRPCEnvironmentalObjectsTable | 1.3.6.1.4.1.4779.1.6.2 | not-accessible | Allows monitoring of individual outlet strips on RPCs. | |
| INT sRPCEnvironmentalPortIndex | 1.3.6.1.4.1.4779.1.6.2.1.2 | INTEGER | read-only | Port Index for Environemntal table |
| INT sRPCEnvironmentalSensorsIndex | 1.3.6.1.4.1.4779.1.6.2.1.3 | INTEGER | read-only | Sensor Index for Environemntal table |
| INT sRPCEnvironmentalStateTrapEn | 1.3.6.1.4.1.4779.1.6.2.1.13 | INTEGER | read-write | Trap enable for environmental sensors with contacts. |
| INT sRPCEnvironmentalType | 1.3.6.1.4.1.4779.1.6.2.1.4 | INTEGER | read-only | Environmental Object Type. |
| STR sRPCFirmwareVersion | 1.3.6.1.4.1.4779.1.3.5.5.1.5 | DisplayString | read-only | The firware version of the rpc module. |
| INT sRPCLowCurrentThreshold | 1.3.6.1.4.1.4779.1.3.5.5.1.22 | INTEGER | read-write | Low current threshold for this RPC. |
| INT sRPCMaxCurrent | 1.3.6.1.4.1.4779.1.3.5.5.1.7 | INTEGER | read-write | The maximum detected current reading for the power strip. If current measurement is not installed this value will always read 0. Setting this value to 0 will clear the maximum current detected. |
| sRPCModPortBreakersEntry | 1.3.6.1.4.1.4779.1.3.5.10.1 | not-accessible | Status organization by breaker. | |
| sRPCModPortBreakersTable | 1.3.6.1.4.1.4779.1.3.5.10 | not-accessible | Allows monitoring of individual outlet strips on RPCs. | |
| INT sRPCModuleIndex | 1.3.6.1.4.1.4779.1.3.5.5.1.1 | INTEGER | read-only | The module number index into the RPC table. |
| STR sRPCName | 1.3.6.1.4.1.4779.1.3.5.5.1.4 | DisplayString | read-write | The name (unit id) of the rpc module. |
| INT sRPCNumberOfBreakers | 1.3.6.1.4.1.4779.1.3.5.5.1.21 | INTEGER | read-only | Number of breakers for this RPC. |
| INT sRPCNumberOfOutlets | 1.3.6.1.4.1.4779.1.3.5.5.1.17 | INTEGER | read-only | Number of outlets for this RPC. This will be the size of outlet table for this RPC index. |
| INT sRPCNumberOfSensors | 1.3.6.1.4.1.4779.1.3.5.5.1.25 | INTEGER | read-only | Number of sensors for this RPC. |
| INT sRPCOutletIndex | 1.3.6.1.4.1.4779.1.3.5.6.1.3 | INTEGER | read-only | The outlet index to the outlet entry. |
| INT sRPCOutletModuleIndex | 1.3.6.1.4.1.4779.1.3.5.6.1.1 | INTEGER | read-only | The module index to the outlet entry. |
| STR sRPCOutletName | 1.3.6.1.4.1.4779.1.3.5.6.1.5 | DisplayString | read-write | The name of the outlet. Maximum size is 16 characters. |
| INT sRPCOutletPortIndex | 1.3.6.1.4.1.4779.1.3.5.6.1.2 | INTEGER | read-only | The port index to the outlet entry. In the case of ds30s this number is always 1. |
| INT sRPCOutletState | 1.3.6.1.4.1.4779.1.3.5.6.1.4 | INTEGER | read-write | Getting this variable will return the state of the outlet. Valid return states are unknown, on, off, lockon, lockoff. 0 = off 1 = on 2 = reboot 3 = lockon (outlet is on and no changes are allowed) 4 = lockoff (outlet is off and no changes are allowed) 5 = unlock. |
| INT sRPCOverTempThreshold | 1.3.6.1.4.1.4779.1.3.5.5.1.19 | INTEGER | read-write | The over temperature alarm threshold level *10. A value of 505 will set the level to 50.5. |
| INT sRPCOverVoltageThreshold | 1.3.6.1.4.1.4779.1.3.5.5.1.15 | INTEGER | read-write | The over voltage alarm threshold level *10. A value of 105 will set the level to 10.5. |
| INT sRPCPortIndex | 1.3.6.1.4.1.4779.1.3.5.5.1.2 | INTEGER | read-only | The port number index into the RPC table. In the case of ds30 modules this number is always 1. |
| INT sRPCPower | 1.3.6.1.4.1.4779.1.3.5.5.1.9 | INTEGER | read-only | The power reading for the power strip. If power measurement is not installed this value will always read 0. |
| INT sRPCRebootTimeout | 1.3.6.1.4.1.4779.1.3.5.5.1.11 | INTEGER | read-write | The length of off time for automatic reboot sequences. Currently a read-only value set to the fixed reboot timeout. |
| INT sRPCSourceSwitchCount | 1.3.6.1.4.1.4779.1.3.5.5.1.24 | INTEGER | read-write | Voltage source switch count for this RPC. |
| INT sRPCTemperature | 1.3.6.1.4.1.4779.1.3.5.5.1.10 | INTEGER | read-only | The temperature reading for the power strip. Readings are in degrees C. If temperature measurement is not installed this value will always read 0. |
| STR sRPCType | 1.3.6.1.4.1.4779.1.3.5.5.1.3 | DisplayString | read-only | Type of RPC at the module, port index. |
| INT sRPCUnderVoltageThreshold | 1.3.6.1.4.1.4779.1.3.5.5.1.16 | INTEGER | read-write | The under voltage alarm threshold level *10. A value of 105 will set the level to 10.5. |
| INT sRPCUnitVA | 1.3.6.1.4.1.4779.1.3.5.5.1.20 | INTEGER | read-only | Number of outlets for this RPC. This will be the size of outlet table for this RPC index. |
| INT sRPCVoltage | 1.3.6.1.4.1.4779.1.3.5.5.1.8 | INTEGER | read-only | The voltage reading for the power strip. If voltage measurement is not installed this value will always read 0. |
| INT sRPCVoltageSource | 1.3.6.1.4.1.4779.1.3.5.5.1.23 | INTEGER | read-write | Voltage source for this RPC. |
| NTF temperatureThresholdViolation | 1.3.6.1.4.1.4779.0.15 | WARNING: A temperature threshold has been violated. The argument is the rpc index. | ||
| NTF temperatureThresholdViolationCleared | 1.3.6.1.4.1.4779.0.16 | INFORMATIONAL: A temperature threshold violated has been cleared. The argument is the rpc index. | ||
| INT trapIndex | 1.3.6.1.4.1.4779.1.2.8.4.1.1 | INTEGER | read-only | The index to a trap receiver entry. |
| NTF userAdded | 1.3.6.1.4.1.4779.0.13 | WARNING: The specified user has been added. | ||
| NTF userDeleted | 1.3.6.1.4.1.4779.0.30 | INFORMATIONAL: The specified user has logged in. | ||
| NTF userLoggedIn | 1.3.6.1.4.1.4779.0.14 | INFORMATIONAL: The specified user has logged in. | ||
| NTF userPasswordChange | 1.3.6.1.4.1.4779.0.12 | WARNING: The password for the specified user has been changed. | ||
| NTF userTerminated | 1.3.6.1.4.1.4779.0.23 | WARNING: user terminated. Argument specifies user. | ||
| NTF voltageOverThresholdViolation | 1.3.6.1.4.1.4779.0.24 | WARNING: Over voltage. Argument specifies rpc. | ||
| NTF voltageOverThresholdViolationCleared | 1.3.6.1.4.1.4779.0.25 | INFORMATIONAL: Over voltage cleared. Argument specifies rpc. | ||
| NTF voltageSourceChangeAlarm | 1.3.6.1.4.1.4779.0.38 | WARNING: RPC voltage source has changed. Arguments specify modules index, current voltage source, and count of number of times source has been switched. | ||
| NTF voltageUnderThresholdViolation | 1.3.6.1.4.1.4779.0.26 | WARNING: Under voltage. Argument specifies rpc. | ||
| NTF voltageUnderThresholdViolationCleared | 1.3.6.1.4.1.4779.0.27 | INFORMATIONAL: Under voltage cleared. Argument specifies rpc. | ||
| INT warningThreshold | 1.3.6.1.4.1.4779.1.3.5.8.1.4 | INTEGER | read-write | The current level, in tenths of an amp, that will cause a Current Level Warning trap to be sent if the total current for the associated group if exceeded. Conversely, a Current Level Warning Clear trap will be sent whent the total group current falls below the threshold. |
| NTF warningThresholdViolation | 1.3.6.1.4.1.4779.0.31 | |||
| NTF warningThresholdViolationClear | 1.3.6.1.4.1.4779.0.32 |
RFC description
Baytech MIB for the Baytech 401/4 remote power distribution unit (PDU), providing monitoring of outlet states, power consumption, and power cycling capabilities for data center equipment.
Start monitoring Baytech 401-series power controller/PDU (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.