BIANCA-BRICK-UPNP-MIB

All MIBs › BIANCA-BRICK-UPNP-MIB

Category: Device Management, Vendor: bintec

Description: Manages UPnP (Universal Plug and Play) IGD service configuration on bintec elmeg BIANCA/BRICK routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BIANCA-BRICK-UPNP-MIB?

BIANCA-BRICK-UPNP-MIB is a legacy BinTec/BiAnca (enterprise OID 272, Brick router family) proprietary MIB configuring UPnP (Universal Plug and Play) port-mapping. Its objects cover a global status (enabled/restricted-to-client-IP/disabled), TCP port, SSDP TTL, a NAT-UPnP mapping table (interface, protocol, remote address, external port, internal address/port, lease duration, status, description), and a per-interface table (client-request count, UPnP-controlled flag). As a configuration/status MIB it lets an administrator confirm which UPnP port mappings clients have created on a legacy BiAnca (BinTec) Brick router. It is deployed on legacy BiAnca (BinTec) Brick router equipment (UPnP). Engineers can download the BIANCA-BRICK-UPNP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-BRICK-UPNP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy BiAnca (BinTec) Brick router equipment (UPnP)

Monitoring Examples

An administrator checks ipNatUPnPTable to confirm which UPnP port mappings a client created on a legacy BiAnca (BinTec) Brick router.

What Can Be Monitored

UPnP port-mapping configuration

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress
enterprises

From RFC1158-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
bintec	1.3.6.1.4.1.272
bibo	1.3.6.1.4.1.272.4
biboip	1.3.6.1.4.1.272.4.5
upnp	1.3.6.1.4.1.272.4.5.45
upnpGlobals	1.3.6.1.4.1.272.4.5.45.10
INT upnpGlobStatus	1.3.6.1.4.1.272.4.5.45.10.10	INTEGER	read-write	This object specifies whether UPnP is enabled on the router. Possible values: enabled(10), -- UPnP enabled restricted(20), -- UPnP mapping requests for client IP only disabled(30) -- UPnP disabled (default).
INT upnpGlobTcpPort	1.3.6.1.4.1.272.4.5.45.10.20	INTEGER	read-write	The TCP port which is monitored by UPnP for HTTP requests received from UPnP clients.
INT upnpGlobSsdpTtl	1.3.6.1.4.1.272.4.5.45.10.30	INTEGER	read-write	The time-to-live value for SSDP packet transmitted on the LAN. If this object is set to 0, the default value specified in the ip MIB will be used instead.
ipNatUPnPTable	1.3.6.1.4.1.272.4.5.45.20		not-accessible	This table specifies the IP addresses and port numbers for sessions requested from outside and authorized by a UPnP client. Entries in the table are created by UPnP clients.
ipNatUPnPEntry	1.3.6.1.4.1.272.4.5.45.20.10		not-accessible
INT ipNatUPnPIfIndex	1.3.6.1.4.1.272.4.5.45.20.10.10	INTEGER	read-only	This object specifies the interface index, for which the table entry shall be valid.
INT ipNatUPnPProtocol	1.3.6.1.4.1.272.4.5.45.20.10.20	INTEGER	read-only	This object specifies the protocol, for which the table entry shall be valid.
IP ipNatUPnPRemoteAddr	1.3.6.1.4.1.272.4.5.45.20.10.30	IpAddress	read-only	This object specifies the IP address of the remote host initiating the connection. An incoming call can only be accepted if the IP adress of the remote host initiating the connection is the one specified by this object. If this object is set to 0.0.0.0, the table entry will be valid for any remote host.
INT ipNatUPnPExtPort	1.3.6.1.4.1.272.4.5.45.20.10.40	INTEGER	read-only	This object specifies the destination port number for incoming calls. An incoming call can only be accepted if the destination port is the one specified by this object. If this object is set to -1, the entry is valid for all port numbers.
IP ipNatUPnPIntAddr	1.3.6.1.4.1.272.4.5.45.20.10.50	IpAddress	read-only	This object specifies the internal target host IP address for incoming calls matching the table entry. An incoming call matching this entry will be routed to the internal server specified by this object.
INT ipNatUPnPIntPort	1.3.6.1.4.1.272.4.5.45.20.10.60	INTEGER	read-only	This object specifies the internal target host port-number for incoming calls matching the table entry.
INT ipNatUPnPLeaseDuration	1.3.6.1.4.1.272.4.5.45.20.10.70	INTEGER	read-only	This object specifies a lease duration in seconds. The entry is discarded at the end of this time. If this object is set to 0, the lease duration is infinite, and the entry will have to be explicitely deleted by a UPnP client.
INT ipNatUPnPStatus	1.3.6.1.4.1.272.4.5.45.20.10.80	INTEGER	read-write	This object specifies whether this entry is currently enabled or disabled.
STR ipNatUPnPDescription	1.3.6.1.4.1.272.4.5.45.20.10.90	DisplayString	read-only	This object specifies an optional description for this entry.
upnpIfTable	1.3.6.1.4.1.272.4.5.45.30		not-accessible	This table specifies how various interfaces are handled by UPnP. Entries in the table are created and deleted by the system.
upnpIfEntry	1.3.6.1.4.1.272.4.5.45.30.10		not-accessible	An entry in the upnpIfTable.
INT upnpIfIndex	1.3.6.1.4.1.272.4.5.45.30.10.10	INTEGER	read-only	This object specifies the interface index, for which the table entry shall be valid.
INT upnpIfClientRequests	1.3.6.1.4.1.272.4.5.45.30.10.20	INTEGER	read-write	This object specifies whether UPnP accepts client requests received through this interface. Possible values: enabled(10) -- UPnP client requests enabled disabled(20) -- UPnP client requests disabled (default).
INT upnpIfUPnPControlled	1.3.6.1.4.1.272.4.5.45.30.10.30	INTEGER	read-write	This object specifies if this interface can be controlled through UPnP requests. Possible values: enabled(10) -- UPnP control of the interface enabled disabled(20) -- UPnP control of the interface disabled (default).

RFC description

Manages UPnP configuration and NAT port mapping on bintec router equipment.

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BIANCA-BRICK-UPNP-MIB

What Is BIANCA-BRICK-UPNP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description