All MIBs › BIANCA-BRICK-IP-SERVICE-MIB
Category: IP and Core Protocols, Vendor: bintec
Description: Configures IP services on bintec elmeg BIANCA/BRICK broadband routers, encompassing NAT, routing, and IP filtering.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BIANCA-BRICK-IP-SERVICE-MIB?
BIANCA-BRICK-IP-SERVICE-MIB is a vendor-specific enterprise MIB from bintec elmeg covering higher-layer IP services on BIANCA/BRICK broadband routers, including NAT, routing policy, and IP packet filtering configuration. It belongs to the configuration/service-policy category for these small-business routers rather than raw interface statistics. Its monitoring relevance is mainly to software/service configuration state: confirming that NAT translation rules, routing entries, and IP filter/firewall rules are active and correctly applied, which is a software-configuration health check rather than a hardware sensor reading. It likely complements BIANCA-BRICK-IP-MIB, since IP services build on the base IP interface/routing objects that module defines. It is deployed on bintec elmeg BIANCA/BRICK broadband routers in small-office/branch environments needing NAT and packet filtering. Network engineers evaluating or troubleshooting this functionality can download the BIANCA-BRICK-IP-SERVICE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-BRICK-IP-SERVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- bintec elmeg BIANCA/BRICK broadband router
Monitoring Examples
No sample_objects were provided for this module, so no concrete object/table names can be quoted; conceptually it would expose NAT rule tables, routing policy entries, and IP filter rule status objects. An operator would check such objects to confirm NAT/firewall rules are enabled and correctly ordered, revealing misconfigured filtering that could block or unintentionally allow traffic. No fabricated names are used given the empty sample_objects list.
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| TimeTicks |
OIDs
RFC description
Manages IP services configuration on bintec elmeg BIANCA/BRICK broadband routers, including NAT, routing, and IP filtering.
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.