All MIBs › BIANCA-BRICK-HDSL2SHDSL2-MIB › hdsl2ShdslEndpointConfWorstCaseTargetMarginDown
hdsl2ShdslEndpointConfWorstCaseTargetMarginDown
Module: BIANCA-BRICK-HDSL2SHDSL2-MIB
OID (symbolic): BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfWorstCaseTargetMarginDown
OID (numeric): 1.3.6.1.4.1.272.4.35.1.1.4.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the downstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
What is hdsl2ShdslEndpointConfWorstCaseTargetMarginDown?
This writable configuration parameter sets the minimum acceptable downstream signal-to-noise ratio margin for an SHDSL line. SNR margin measures how much headroom exists before signal degradation causes line failure. Setting hdsl2ShdslEndpointConfWorstCaseTargetMarginDown to 6 dB means the line must maintain at least 6 dB of SNR margin or it will attempt to re-negotiate a lower speed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.11 snmpwalk -v2c -c public <target> BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfWorstCaseTargetMarginDown
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.11.1 snmpget -v2c -c public <target> BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfWorstCaseTargetMarginDown.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.11.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfWorstCaseTargetMarginDown OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.35 | hdsl2shdsl | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1 | hdsl2ShdslLineMib | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1 | hdsl2ShdslMibObjects | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1.4 | hdsl2ShdslEndpointConfTable | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1.4.1 | hdsl2ShdslEndpointConfEntry | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.11 | hdsl2ShdslEndpointConfWorstCaseTargetMarginDown | BIANCA-BRICK-HDSL2SHDSL2-MIB |