All MIBs › BIANCA-BRICK-HDSL2SHDSL2-MIB › hdsl2ShdslEndpointConfPamMode
hdsl2ShdslEndpointConfPamMode
Module: BIANCA-BRICK-HDSL2SHDSL2-MIB
OID (symbolic): BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfPamMode
OID (numeric): 1.3.6.1.4.1.272.4.35.1.1.4.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies which modulation modes are allowed for this wire pair. 16 - 16-TCPAM, used for Annex A,B and F,G. 32 - 32-TCPAM, used for Annex F,G only. 4, 8, 64, 128 - non standard proprietary modes. On CPE site more than one mode can be allowed by adding the values. On CO site only the highest mode is used if several values are added.
What is hdsl2ShdslEndpointConfPamMode?
This object specifies which modulation modes are allowed for this wire pair. 16 - 16-TCPAM, used for Annex A,B and F,G. 32 - 32-TCPAM, used for Annex F,G only. 4, 8, 64, 128 - non standard proprietary modes. On CPE site more than one mode can be allowed by adding the values. On CO site only the highest mode is used if several values are added. The specific value of hdsl2ShdslEndpointConfPamMode affects read-write behavior. Refer to device documentation for configuration guidance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.17 snmpwalk -v2c -c public <target> BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfPamMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.17.1 snmpget -v2c -c public <target> BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfPamMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.17.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hdsl2ShdslEndpointConfPamMode.1
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfPamMode OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.35 | hdsl2shdsl | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1 | hdsl2ShdslLineMib | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1 | hdsl2ShdslMibObjects | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1.4 | hdsl2ShdslEndpointConfTable | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1.4.1 | hdsl2ShdslEndpointConfEntry | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.17 | hdsl2ShdslEndpointConfPamMode | BIANCA-BRICK-HDSL2SHDSL2-MIB |