BIANCA-BRICK-HDSL2SHDSL2-MIB :: hdsl2ShdslEndpointConfMinWirePairs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBIANCA-BRICK-HDSL2SHDSL2-MIBhdsl2ShdslEndpointConfMinWirePairs

hdsl2ShdslEndpointConfMinWirePairs

Module: BIANCA-BRICK-HDSL2SHDSL2-MIB

OID (symbolic): BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfMinWirePairs

OID (numeric): 1.3.6.1.4.1.272.4.35.1.1.4.1.19

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object configures the minimum number of wire pairs for the associated SHDSL bundle. The associated interfaces go up only when at least the specified number of wire pairs is connected and in Showtime. This variable has no effect with single pair modes.

What is hdsl2ShdslEndpointConfMinWirePairs?

This object configures the minimum number of wire pairs for the associated SHDSL bundle. The associated interfaces go up only when at least the specified number of wire pairs is connected and in Showtime. This variable has no effect with single pair modes. The specific value of hdsl2ShdslEndpointConfMinWirePairs affects read-write behavior. Refer to device documentation for configuration guidance.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.19
snmpwalk -v2c -c public <target> BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfMinWirePairs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.19.1
snmpget -v2c -c public <target> BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfMinWirePairs.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.19.1 i <value>

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfMinWirePairs OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.272bintecBIANCA-BOX-ISDN-MIB
1.3.6.1.4.1.272.4biboBIANCA-BOX-ISDN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.272.4.35hdsl2shdslBIANCA-BRICK-HDSL2SHDSL2-MIB
1.3.6.1.4.1.272.4.35.1hdsl2ShdslLineMibBIANCA-BRICK-HDSL2SHDSL2-MIB
1.3.6.1.4.1.272.4.35.1.1hdsl2ShdslMibObjectsBIANCA-BRICK-HDSL2SHDSL2-MIB
1.3.6.1.4.1.272.4.35.1.1.4hdsl2ShdslEndpointConfTableBIANCA-BRICK-HDSL2SHDSL2-MIB
1.3.6.1.4.1.272.4.35.1.1.4.1hdsl2ShdslEndpointConfEntryBIANCA-BRICK-HDSL2SHDSL2-MIB
1.3.6.1.4.1.272.4.35.1.1.4.1.19hdsl2ShdslEndpointConfMinWirePairsBIANCA-BRICK-HDSL2SHDSL2-MIB