All MIBs › BIANCA-BRICK-HDSL2SHDSL2-MIB › hdsl2ShdslEndpointConfLineProbeEnable
hdsl2ShdslEndpointConfLineProbeEnable
Module: BIANCA-BRICK-HDSL2SHDSL2-MIB
OID (symbolic): BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfLineProbeEnable
OID (numeric): 1.3.6.1.4.1.272.4.35.1.1.4.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the configuration of the PMMS behavior: auto - Line Probe is enabled if hdsl2ShdslEndpointConfMinLineRate < hdsl2ShdslEndpointConfMaxLineRate. disable - Line Probe is disabled. enable - Line Probe is enabled. enable_std - Line Probe is enabled and standard compliant behaviour is enforced.
What is hdsl2ShdslEndpointConfLineProbeEnable?
This writable parameter controls the Physical Medium-dependent Management Signal (PMMS) line probe behavior. Options are auto (enable if rate range is non-zero), disable, enable, or enable-std (standards-compliant mode). Setting hdsl2ShdslEndpointConfLineProbeEnable to 'disable' disables the line probe to reduce overhead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.15 snmpwalk -v2c -c public <target> BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfLineProbeEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.15.1 snmpget -v2c -c public <target> BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfLineProbeEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.35.1.1.4.1.15.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-HDSL2SHDSL2-MIB::hdsl2ShdslEndpointConfLineProbeEnable OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.35 | hdsl2shdsl | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1 | hdsl2ShdslLineMib | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1 | hdsl2ShdslMibObjects | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1.4 | hdsl2ShdslEndpointConfTable | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1.4.1 | hdsl2ShdslEndpointConfEntry | BIANCA-BRICK-HDSL2SHDSL2-MIB |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.15 | hdsl2ShdslEndpointConfLineProbeEnable | BIANCA-BRICK-HDSL2SHDSL2-MIB |