BENU-HTTP-CLIENT-MIB

All MIBs › BENU-HTTP-CLIENT-MIB

Organization: Benu Networks,Inc

Last Updated: 2015-10-21

Category: Vendor: Benu Networks, Web and Application Servers

Description: Manages HTTP client connection statistics and request/response counters on Benu Networks gateway platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BENU-HTTP-CLIENT-MIB?

BENU-HTTP-CLIENT-MIB is a Benu Networks vendor MIB reporting performance statistics for the HTTP client component embedded in Benu's broadband/mobile gateway platforms. It exposes interval-based latency statistics including total packet counts and minimum/maximum/average processing times, plus counts of requests exceeding a 10ms processing threshold, tracked both for general HTTP client latency and for server-request latency specifically. This is primarily a performance-counter MIB used to gauge software health of the HTTP client subsystem, where rising max/average processing times or growing slow-response counts indicate the client is struggling or a backend server is responding slowly. It is a self-contained vendor MIB with no notable dependency on other standard MIBs beyond the SNMPv2 framework. It is typically deployed on Benu Networks gateway/access controller platforms used by broadband and mobile operators. Engineers can download the BENU-HTTP-CLIENT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BENU-HTTP-CLIENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Benu Networks broadband/mobile gateway platform

Monitoring Examples

An operator polling bHttpClientLatencyTable/bHttpClientLatencyEntry over each bHttpClientLatencyStatsInterval would track bHttpClientLatencyAvgProcessingTime and bHttpClientLatencyMaxProcessingTime to baseline normal HTTP client performance. A sustained increase in bHttpClientLatencyProcessTimeMorethan10MSPktCount alongside a rise in bHttpClientServReqLatencyMaxProcessingTime would point to a slow or overloaded backend HTTP server rather than a client-side fault.

What Can Be Monitored

HTTP client request latency (min/max/avg)
packet counts per interval
slow-response (>10ms) packet counts
server-request latency statistics

Imported Objects

From BENU-WAG-MIB

benuWAG

MODULE-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

OIDs

OID symbolic	OID numeric	Type	Access	Description
benuHttpClientMIB	1.3.6.1.4.1.39406.2.1.11			This MIB module defines management information related to the HTTP client. Copyright (C) 2013 by Benu Networks, Inc. All rights reserved.
bHttpClientObjects	1.3.6.1.4.1.39406.2.1.11.1			HTTP client information is defined in this branch.
bHttpClientLatencyTable	1.3.6.1.4.1.39406.2.1.11.1.1		not-accessible	Latency information list for HTTP client.
bHttpClientLatencyEntry	1.3.6.1.4.1.39406.2.1.11.1.1.1		not-accessible	A logical row in the bHttpClientLatencyTable.
I32 bHttpClientLatencyStatsInterval	1.3.6.1.4.1.39406.2.1.11.1.1.1.1	Integer32	not-accessible	The interval during which the measurements were accumulated. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics data, greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n), the most and least recent intervals respectively, the following applies at the end of an interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount.
I32 bHttpClientLatencyStatsIntervalDuration	1.3.6.1.4.1.39406.2.1.11.1.1.1.2	Integer32	read-only	Http client latency stats interval duration.
U32 bHttpClientLatencyTotalPktCount	1.3.6.1.4.1.39406.2.1.11.1.1.1.3	Unsigned32	read-only	The count of the total number of packets handled by http client.
U32 bHttpClientLatencyMaxProcessingTime	1.3.6.1.4.1.39406.2.1.11.1.1.1.4	Unsigned32	read-only	Maximum packet processing time handled by http client in micro seconds.
U32 bHttpClientLatencyMinProcessingTime	1.3.6.1.4.1.39406.2.1.11.1.1.1.5	Unsigned32	read-only	Minimum packet processing time handled by http client in micro seconds.
U32 bHttpClientLatencyAvgProcessingTime	1.3.6.1.4.1.39406.2.1.11.1.1.1.6	Unsigned32	read-only	Average packet processing time handled by http client in micro seconds.
U32 bHttpClientLatencyProcessTimeMorethan10MSPktCount	1.3.6.1.4.1.39406.2.1.11.1.1.1.7	Unsigned32	read-only	Number of packets took more than 10 milli second processing time handled by http client.
U32 bHttpClientServReqLatencyTotalPktCount	1.3.6.1.4.1.39406.2.1.11.1.1.1.8	Unsigned32	read-only	Total number of http server request packets handled by http client.
U32 bHttpClientServReqLatencyMaxProcessingTime	1.3.6.1.4.1.39406.2.1.11.1.1.1.9	Unsigned32	read-only	Http server request handled by http client maximum packet processing time in micro seconds.
U32 bHttpClientServReqLatencyMinProcessingTime	1.3.6.1.4.1.39406.2.1.11.1.1.1.10	Unsigned32	read-only	Http server request handled by http client minimum packet processing time in micro seconds.
U32 bHttpClientServReqLatencyAvgProcessingTime	1.3.6.1.4.1.39406.2.1.11.1.1.1.11	Unsigned32	read-only	Http server request handled by http client average packet processing time in micro seconds.
U32 bHttpClientServReqLatencyProcessTimeMorethan10MSPktCount	1.3.6.1.4.1.39406.2.1.11.1.1.1.12	Unsigned32	read-only	Number of http server request packets handled by http client took more than 10 milli second processing time.
U32 bHttpClientJsonParsingLatencyTotalPktCount	1.3.6.1.4.1.39406.2.1.11.1.1.1.13	Unsigned32	read-only	Total number of packets handled by http client - JSON parsing.
U32 bHttpClientJsonParsingLatencyMaxProcessingTime	1.3.6.1.4.1.39406.2.1.11.1.1.1.14	Unsigned32	read-only	Maximum packet processing time for JSON parsing handled by httpclient in micro seconds.
U32 bHttpClientJsonParsingLatencyMinProcessingTime	1.3.6.1.4.1.39406.2.1.11.1.1.1.15	Unsigned32	read-only	Minimum packet processing time for JSON parsing handled by httpclient in micro seconds.
U32 bHttpClientJsonParsingLatencyAvgProcessingTime	1.3.6.1.4.1.39406.2.1.11.1.1.1.16	Unsigned32	read-only	Average packet processing time for JSON parsing handled by httpclient in micro seconds.
U32 bHttpClientJsonParsingLatencyProcessTimeMorethan10MS	1.3.6.1.4.1.39406.2.1.11.1.1.1.17	Unsigned32	read-only	Number of packets handled by http client for JSON parsing took more than 10 milli second processing time.

RFC description

Benu vendor-private MIB for managing HTTP client connections and proxy functionality.

Start monitoring Benu Networks gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BENU-HTTP-CLIENT-MIB

What Is BENU-HTTP-CLIENT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description