All MIBs › Axd301EqmIf-SWS
Organization: Ericsson
Last Updated: 1999-01-01
Category: ATM
Description:
Manages equipment and interface objects for the Ericsson AXD 301 switch subsystem.
Imported Objects
From Axd301Comm-OMS
| ats | MODULE-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
What Is Axd301EqmIf-SWS?
Axd301EqmIf-SWS is a "stub" MIB managing equipment and interface objects for the switch subsystem (SWS) of the Ericsson AXD301 ATM switch, per its module description. The only sampled object, ifIndex, indicates this module ties its (largely unpopulated, in this excerpt) equipment/interface objects to the standard IF-MIB interface index, suggesting it augments standard interface table rows with AXD301-specific equipment/interface attributes. As a stub it likely does not itself expose rich hardware/software counters in this excerpt, but its dependence on ifIndex implies it correlates AXD301 switch-subsystem equipment status with standard interface-level operational/administrative status. It explicitly depends on the standard IETF IF-MIB (ifIndex) for interface identification, layered under the Ericsson AXD301 platform's broader equipment MIB family. It is deployed as part of the Ericsson AXD301 ATM switch's management software, covering the switch subsystem's physical/interface equipment. Engineers can download the Axd301EqmIf-SWS file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Axd301EqmIf-SWS. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Ericsson AXD301 ATM switch (switch subsystem equipment/interfaces)
Monitoring Examples
The only sampled object is ifIndex, the standard interface-table index imported from IF-MIB, indicating this module correlates AXD301 switch-subsystem equipment entries to standard interface rows rather than exposing populated equipment objects in this excerpt. No further concrete leaf objects were present to describe a specific monitoring scenario beyond this interface-index linkage.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| axd301EqmIf | 1.3.6.1.4.1.193.183.2 | Ericsson AXD301 Equipment Interface SWS stub. | ||
| IFI ifIndex | 1.3.6.1.4.1.193.183.2.1 | IfIndex | read-only | Interface index. |
RFC description
Vendor-private MIB from Ericsson Telecom for the AXD 301 ATM switching system, manages equipment interface control for ATM switch fabric subsystems.
Start monitoring Ericsson AXD 301 ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.