All MIBs › ATT-VPN-GATEWAY-MIB › ngevIPv6ActiveWanIp
ngevIPv6ActiveWanIp
Module: ATT-VPN-GATEWAY-MIB
OID (symbolic): ATT-VPN-GATEWAY-MIB::ngevIPv6ActiveWanIp
OID (numeric): 1.3.6.1.4.1.74.1.30.8.2.1.26
Node type: OBJECT-TYPE
Type: InetAddressIPv6
Access: accessible-for-notify
Description: The IP address of the active IPv6 WAN interface. When viewing the output of the SNMP tree this can be determined from the interface statistics. However, for traps the active WAN interface might not be used to send the trap (i.e. it could be down the tunnel. Set to zero if not used.
What is ngevIPv6ActiveWanIp?
Reports the IPv6 address of the currently active WAN interface on the AT&T VPN Gateway. Because the active WAN interface may not be the path used to send traps (for example, when traffic is routed through a tunnel), this field makes the active interface address explicitly available in trap data.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.74 | att_2 | ATT-CNM-ENHANCED-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.74.1 | att_products | ATT-CNM-ENHANCED-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.74.1.30 | attNetGate | ATT-NETGATE-MIB |
| 1.3.6.1.4.1.74.1.30.8 | attNetGateMIB | ATT-NETGATE-MIB |
| 1.3.6.1.4.1.74.1.30.8.2 | ngEvents | ATT-NETGATE-MIB |
| 1.3.6.1.4.1.74.1.30.8.2.1 | ngEventObjects | ATT-NETGATE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.74.1.30.8.2.1.26 | ngevIPv6ActiveWanIp | ATT-VPN-GATEWAY-MIB |