All MIBs › ATT-NETGATE-MIB › ngvlIPv6IpRangeStart

ngvlIPv6IpRangeStart

OID (symbolic): ATT-NETGATE-MIB::ngvlIPv6IpRangeStart

OID (numeric): 1.3.6.1.4.1.74.1.30.3.1.1.10

Node type: OBJECT-TYPE

Type: InetAddressIPv6

Access: read-only

Description: The start of the range of IPv6 IP addresses handed out via DHCP on this VLAN. Value will be all zeroes if DHCP is not enabled on this VLAN.

What is ngvlIPv6IpRangeStart?

Reports the starting IPv6 address of the DHCP address pool assigned on this VLAN. A value of all zeroes indicates that DHCPv6 is not enabled on the VLAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.74.1.30.3.1.1.10
snmpwalk -v2c -c public <target> ATT-NETGATE-MIB::ngvlIPv6IpRangeStart

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.74.1.30.3.1.1.10.1
snmpget -v2c -c public <target> ATT-NETGATE-MIB::ngvlIPv6IpRangeStart.1

Start monitoring AT&T NetGate network access/gateway devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATT-NETGATE-MIB::ngvlIPv6IpRangeStart OID value, configure state conditions and alerts, and monitor any AT&T NetGate network access/gateway devices from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.74	att_2	ATT-CNM-ENHANCED-FRAME-RELAY-MIB
1.3.6.1.4.1.74.1	att_products	ATT-CNM-ENHANCED-FRAME-RELAY-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.74.1.30	attNetGate	ATT-NETGATE-MIB
1.3.6.1.4.1.74.1.30.3	ngVlanInfo	ATT-NETGATE-MIB
1.3.6.1.4.1.74.1.30.3.1	ngVlanTable	ATT-NETGATE-MIB
1.3.6.1.4.1.74.1.30.3.1.1	ngVlanEntry	ATT-NETGATE-MIB
1.3.6.1.4.1.74.1.30.3.1.1.10	ngvlIPv6IpRangeStart	ATT-NETGATE-MIB

ATT-NETGATE-MIB :: ngvlIPv6IpRangeStart

ngvlIPv6IpRangeStart

Also defined in

Module

This MIB depends on