All MIBs › ATMF-CES › atmfCESCas
atmfCESCas
Module: ATMF-CES
OID (symbolic): ATMF-CES::atmfCESCas
OID (numeric): 1.3.6.1.4.1.353.5.2.2.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description:
This parameter selects which AAL1 Format should be used: Basic does not carry CAS bits, and uses a single 125 usec frame. e1Cas, ds1SfCas, dS1EsfCas and j2Cas carry CAS bits in a multiframe structure for E1, DS1 SF, DS1 ESF and J2 respectively. This applies to structured interfaces only. Default is basic (1). For unstructured interfaces this value, if present, must be set to the default of basic (1).
What is atmfCESCas?
This OID selects which telephone signaling format (basic, E1, DS1, etc.) is used for converting voice circuits into ATM packets. Different countries use different formats. A network operator sets this to match the TDM circuit type being converted—for example, E1 for European telecom lines.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-SNMP-M4-MIB |
| 1.3.6.1.4.1.353.5 | atmForumNetworkManagement | ATM-FORUM-SNMP-M4-MIB |
| 1.3.6.1.4.1.353.5.2 | atmfCESmib | ATMF-CES |
| 1.3.6.1.4.1.353.5.2.2 | atmfCES | ATMF-CES |
| 1.3.6.1.4.1.353.5.2.2.1 | atmfCESObjects | ATMF-CES |
| 1.3.6.1.4.1.353.5.2.2.1.1 | atmfCESConfTable | ATMF-CES |
| 1.3.6.1.4.1.353.5.2.2.1.1.1 | atmfCESConfEntry | ATMF-CES |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.7 | atmfCESCas | ATMF-CES |