ATEN-PE-CFG-STR :: fixedIPv4

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsATEN-PE-CFG-STRfixedIPv4

fixedIPv4

Module: ATEN-PE-CFG-STR

OID (symbolic): ATEN-PE-CFG-STR::fixedIPv4

OID (numeric): 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.2

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: Display or set fixed IPv4 address

What is fixedIPv4?

This read-write IP address sets the static IPv4 address for the PDU when staticIPEnabled is active. It defines the device's permanent network address. Setting it to 10.0.1.50 assigns this fixed IP if static mode is enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.2
snmpwalk -v2c -c public <target> ATEN-PE-CFG-STR::fixedIPv4

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.2.1
snmpget -v2c -c public <target> ATEN-PE-CFG-STR::fixedIPv4.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.2.1 a <value>

Start monitoring ATEN PE-series intelligent PDUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATEN-PE-CFG-STR::fixedIPv4 OID value, configure state conditions and alerts, and monitor any ATEN PE-series intelligent PDUs from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.21317atenATEN-PE-CFG
1.3.6.1.4.1.21317.1atenProductsATEN-PE-CFG
1.3.6.1.4.1.21317.1.3overipATEN-PE-CFG
1.3.6.1.4.1.21317.1.3.2poweroveripATEN-PE-CFG
1.3.6.1.4.1.21317.1.3.2.2peATEN-PE-CFG
1.3.6.1.4.1.21317.1.3.2.2.3deviceManagementATEN-PE-CFG
1.3.6.1.4.1.21317.1.3.2.2.3.4configATEN-PE-CFG
1.3.6.1.4.1.21317.1.3.2.2.3.4.6ipv4configATEN-PE-CFG
Numeric OIDNameModule
1.3.6.1.4.1.21317.1.3.2.2.3.4.6.2fixedIPv4ATEN-PE-CFG-STR