All MIBs › ATEN-PE-CFG-STR › enablePOPmode
enablePOPmode
Module: ATEN-PE-CFG-STR
OID (symbolic): ATEN-PE-CFG-STR::enablePOPmode
OID (numeric): 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/Disable POP mode.
What is enablePOPmode?
This read-write value enables/disables Power Off Protection (POP) mode: no(1) or yes(2). A value of 2 means POP protection active.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.1 snmpwalk -v2c -c public <target> ATEN-PE-CFG-STR::enablePOPmode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.1.1 snmpget -v2c -c public <target> ATEN-PE-CFG-STR::enablePOPmode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.1.1 i <value>
Start monitoring ATEN PE-series intelligent PDUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATEN-PE-CFG-STR::enablePOPmode OID value, configure state conditions and alerts, and monitor any ATEN PE-series intelligent PDUs from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.21317 | aten | ATEN-PE-CFG |
| 1.3.6.1.4.1.21317.1 | atenProducts | ATEN-PE-CFG |
| 1.3.6.1.4.1.21317.1.3 | overip | ATEN-PE-CFG |
| 1.3.6.1.4.1.21317.1.3.2 | poweroverip | ATEN-PE-CFG |
| 1.3.6.1.4.1.21317.1.3.2.2 | pe | ATEN-PE-CFG |
| 1.3.6.1.4.1.21317.1.3.2.2.2 | control | ATEN-PE-CFG |
| 1.3.6.1.4.1.21317.1.3.2.2.2.1 | device | ATEN-PE-CFG |
| 1.3.6.1.4.1.21317.1.3.2.2.2.1.17 | pop | ATEN-PE-CFG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.1 | enablePOPmode | ATEN-PE-CFG-STR |