ARUBAWIRED-LOOPPROTECT-MIB :: arubaWiredLoopProtectPortReceiverAction

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ARUBAWIRED-LOOPPROTECT-MIB › arubaWiredLoopProtectPortReceiverAction

arubaWiredLoopProtectPortReceiverAction

Module: ARUBAWIRED-LOOPPROTECT-MIB

OID (symbolic): ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectPortReceiverAction

OID (numeric): 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.6

Node type: OBJECT-TYPE

Type: LoopProtectReceiverAction

Access: read-write

Description: Controls the action taken when a Loop Protection packet is received on this port. When set to 'disableTx' the port that transmitted the packet is disabled.

When set to 'noDisable' the transmitting port is not disabled.

When set to 'disableTxRx' the ports transmitting and receiving the packets are disabled.

What is arubaWiredLoopProtectPortReceiverAction?

A LoopProtectReceiverAction read-write object controlling response to loop detection: disableTx, noDisable, disableTxRx. It determines which ports disable when loops are found. Setting to disableTx(1) disables the transmitting port; disableTxRx(3) disables both directions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.6
snmpwalk -v2c -c public <target> ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectPortReceiverAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.6.1
snmpget -v2c -c public <target> ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectPortReceiverAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.6.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> arubaWiredLoopProtectPortReceiverAction.1

Start monitoring Aruba CX network switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectPortReceiverAction OID value, configure state conditions and alerts, and monitor any Aruba CX network switches from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.47196hpeARUBAWIRED-NETWORKING-OID
1.3.6.1.4.1.47196.4hpeNetworkingARUBAWIRED-NETWORKING-OID
1.3.6.1.4.1.47196.4.1wiredNetworkingDevicesARUBAWIRED-NETWORKING-OID
1.3.6.1.4.1.47196.4.1.1arubaOS_CXARUBAWIRED-NETWORKING-OID
1.3.6.1.4.1.47196.4.1.1.3wndFeaturesARUBAWIRED-NETWORKING-OID
Numeric OIDNameModule
1.3.6.1.4.1.47196.4.1.1.3.1arubaWiredLoopProtectMIBARUBAWIRED-LOOPPROTECT-MIB
1.3.6.1.4.1.47196.4.1.1.3.1.1arubaWiredLoopProtectObjectsARUBAWIRED-LOOPPROTECT-MIB
1.3.6.1.4.1.47196.4.1.1.3.1.1.5arubaWiredLoopProtectARUBAWIRED-LOOPPROTECT-MIB
1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2arubaWiredLoopProtectPortARUBAWIRED-LOOPPROTECT-MIB
1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1arubaWiredLoopProtectPortTableARUBAWIRED-LOOPPROTECT-MIB
1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1arubaWiredLoopProtectPortEntryARUBAWIRED-LOOPPROTECT-MIB
1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.6arubaWiredLoopProtectPortReceiverActionARUBAWIRED-LOOPPROTECT-MIB