All MIBs › ARUBAWIRED-LOOPPROTECT-MIB › arubaWiredLoopProtectEnableTimer
arubaWiredLoopProtectEnableTimer
Module: ARUBAWIRED-LOOPPROTECT-MIB
OID (symbolic): ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectEnableTimer
OID (numeric): 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The time in seconds to wait before re-enabling a port disabled by Loop Protection. When a port is disabled by Loop Protection, a re-enable timer for the port is initialized. If the re-enable timer value is specified as zero seconds the port remains disabled, else the port is re-enabled after the specified time.
What is arubaWiredLoopProtectEnableTimer?
An Integer32 (0..2147483647) read-write object in seconds for automatic port re-enable timing. It sets when a loop-disabled port becomes active again after loop detection. A value of 60 seconds automatically re-enables the port 60 seconds after loop detection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.3 snmpwalk -v2c -c public <target> ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectEnableTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.3.1 snmpget -v2c -c public <target> ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectEnableTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.3.1 i <value>
Start monitoring Aruba CX network switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ARUBAWIRED-LOOPPROTECT-MIB::arubaWiredLoopProtectEnableTimer OID value, configure state conditions and alerts, and monitor any Aruba CX network switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.47196 | hpe | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4 | hpeNetworking | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1 | wiredNetworkingDevices | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1.1 | arubaOS_CX | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1.1.3 | wndFeatures | ARUBAWIRED-NETWORKING-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.47196.4.1.1.3.1 | arubaWiredLoopProtectMIB | ARUBAWIRED-LOOPPROTECT-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1 | arubaWiredLoopProtectObjects | ARUBAWIRED-LOOPPROTECT-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5 | arubaWiredLoopProtect | ARUBAWIRED-LOOPPROTECT-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1 | arubaWiredLoopProtectBase | ARUBAWIRED-LOOPPROTECT-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.3 | arubaWiredLoopProtectEnableTimer | ARUBAWIRED-LOOPPROTECT-MIB |