All MIBs › APPN-TRAP-MIB › appnPortOperStateChangeTrap
appnPortOperStateChangeTrap
Module: APPN-TRAP-MIB
OID (symbolic): APPN-TRAP-MIB::appnPortOperStateChangeTrap
OID (numeric): 1.3.6.1.2.1.34.4.0.4
Node type: NOTIFICATION-TYPE
Description: When it has been enabled, this notification makes it possible for an APPN topology application to get asynchronous notifications of port operational state changes, and thus to reduce the frequency with which it polls for these changes. This notification is only sent when a appnPortOperState has transitioned to a value of 'active' or 'inactive'.
This notification is sent whenever there is a appnPortOperState object transition to 'inactive' or 'active' state in the appnPortTable. This notification is only sent for row creation if the row is created with a value of 'active' for appnPortOperState. This notification is only sent for row deletion if the last value of appnPortOperState was 'active'. In this case, the value of appnPortOperState
in the notification shall be 'inactive', since the deletion of a row indicates that the port is no longer active.
The notification is more than a simple 'poll me now' indication. It carries both a count of port table changes, and the operational state itself. The count of changes allows an application to detect lost notifications, either when polling or upon receiving a subsequent notification, at which point it knows it must retrieve the entire appnPortTable again.
Generation of this notification is controlled by the appnTrapControl object.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' APPN-TRAP-MIB::appnPortOperStateChangeTrap snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.34.4.0.4
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:62348->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (180304268) 20 days, 20:50:42.68 SNMPv2-MIB::snmpTrapOID.0 = OID: APPN-TRAP-MIB::appnPortOperStateChangeTrap
Start monitoring Network devices implementing IETF APPN (RFC 2455) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPN-TRAP-MIB::appnPortOperStateChangeTrap OID value, configure state conditions and alerts, and monitor any Network devices implementing IETF APPN (RFC 2455) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.34 | snanauMIB | SNA-NAU-MIB |
| 1.3.6.1.2.1.34.4 | appnMIB | APPN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.34.4.0 | appnTrapMIB | APPN-TRAP-MIB |
| 1.3.6.1.2.1.34.4.0.4 | appnPortOperStateChangeTrap | APPN-TRAP-MIB |