APPN-TRAP-MIB :: appnLsOperStateChangeTrap

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › APPN-TRAP-MIB › appnLsOperStateChangeTrap

appnLsOperStateChangeTrap

Module: APPN-TRAP-MIB

OID (symbolic): APPN-TRAP-MIB::appnLsOperStateChangeTrap

OID (numeric): 1.3.6.1.2.1.34.4.0.5

Node type: NOTIFICATION-TYPE

Description: When it has been enabled, this notification makes it possible for an APPN topology application to get asynchronous notifications of link station operational state changes, and thus to reduce the frequency with which it polls for these changes. This notification is only sent when a appnLsOperState has transitioned to a value of 'active' or 'inactive'.

This notification is sent whenever there is a appnLsOperState object transition to 'inactive' or 'active' state in the appnLsTable. This notification is only sent for row creation if the row is created with a value of 'active' for appnLsOperState. This notification is only sent for row deletion if the last value of appnLsOperState was 'active'. In this case, the value of appnLsOperState in the notification shall be 'inactive', since the deletion of a row indicates that the link station is no longer active.

The notification is more than a simple 'poll me now' indication. It carries both a count of link station table changes, and the operational state itself. The count of changes allows an application to detect lost notifications, either when polling or upon receiving a subsequent notification, at which point it knows it must retrieve the entire appnLsTable again.

Generation of this notification is controlled by the appnTrapControl object.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' APPN-TRAP-MIB::appnLsOperStateChangeTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.34.4.0.5

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:49946->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (289755418) 33 days, 12:52:34.18
  SNMPv2-MIB::snmpTrapOID.0 = OID: APPN-TRAP-MIB::appnLsOperStateChangeTrap

Start monitoring Network devices implementing IETF APPN (RFC 2455) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPN-TRAP-MIB::appnLsOperStateChangeTrap OID value, configure state conditions and alerts, and monitor any Network devices implementing IETF APPN (RFC 2455) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.34snanauMIBSNA-NAU-MIB
1.3.6.1.2.1.34.4appnMIBAPPN-MIB
Numeric OIDNameModule
1.3.6.1.2.1.34.4.0appnTrapMIBAPPN-TRAP-MIB
1.3.6.1.2.1.34.4.0.5appnLsOperStateChangeTrapAPPN-TRAP-MIB