APPN-TRAP-MIB :: appnIsrAccountingDataTrap

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › APPN-TRAP-MIB › appnIsrAccountingDataTrap

appnIsrAccountingDataTrap

Module: APPN-TRAP-MIB

OID (symbolic): APPN-TRAP-MIB::appnIsrAccountingDataTrap

OID (numeric): 1.3.6.1.2.1.34.4.0.1

Node type: NOTIFICATION-TYPE

Description: When it has been enabled, this notification is generated by an APPN node whenever an ISR session passing through the node is taken down, regardless of whether the session went down normally or abnormally. Its purpose is to allow a management application (primarily an accounting application) that is monitoring the ISR counts to receive the final values of these counts, so that the application can properly account for the amounts the counts were incremented since the last time the application polled them. The appnIsInSessUpTime object provides the total amount of time that the session was active.

This notification is not a substitute for polling the ISR counts. In particular, the count values reported in this notification cannot be assumed to be the complete totals for the life of the session, since they may have wrapped while the session was up.

The session to which the objects in this notification apply is identified by the fully qualified CP name and PCID that make up the table index. An instance of this notification will contain exactly one instance of each of its objects, and these objects will all belong to the same conceptual row of the appnIsInTable.

Generation of this notification is controlled by the same object in the APPN MIB, appnIsInGlobeCtrAdminStatus, that controls whether the count objects themselves are being incremented.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' APPN-TRAP-MIB::appnIsrAccountingDataTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.34.4.0.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:50947->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (337745155) 39 days, 2:10:51.55
  SNMPv2-MIB::snmpTrapOID.0 = OID: APPN-TRAP-MIB::appnIsrAccountingDataTrap

Start monitoring Network devices implementing IETF APPN (RFC 2455) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPN-TRAP-MIB::appnIsrAccountingDataTrap OID value, configure state conditions and alerts, and monitor any Network devices implementing IETF APPN (RFC 2455) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.34snanauMIBSNA-NAU-MIB
1.3.6.1.2.1.34.4appnMIBAPPN-MIB
Numeric OIDNameModule
1.3.6.1.2.1.34.4.0appnTrapMIBAPPN-TRAP-MIB
1.3.6.1.2.1.34.4.0.1appnIsrAccountingDataTrapAPPN-TRAP-MIB