ALCATEL-IND1-BGP-MIB :: alaBgpPeer6KeepAliveConfigured

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALCATEL-IND1-BGP-MIBalaBgpPeer6KeepAliveConfigured

alaBgpPeer6KeepAliveConfigured

Module: ALCATEL-IND1-BGP-MIB

OID (symbolic): ALCATEL-IND1-BGP-MIB::alaBgpPeer6KeepAliveConfigured

OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.65

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in alaBgpPeer6HoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by alaBgpPeer6KeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of alaBgpPeer6HoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.

What is alaBgpPeer6KeepAliveConfigured?

A writable integer specifying the keepalive rate to advertise. Engineers set to 60 to keep session alive with 60-second keepalive messages.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.65
snmpwalk -v2c -c public <target> ALCATEL-IND1-BGP-MIB::alaBgpPeer6KeepAliveConfigured

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.65.1
snmpget -v2c -c public <target> ALCATEL-IND1-BGP-MIB::alaBgpPeer6KeepAliveConfigured.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.65.1 i <value>

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-BGP-MIB::alaBgpPeer6KeepAliveConfigured OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6486alcatelALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801alcatelIND1BaseMIBALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1alcatelIND1ManagementALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2managementIND1SoftwareALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1softwareIND1EntitiesALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.10softentIND1RoutingALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.10.5routingIND1BgpALCATEL-IND1-BASE
Numeric OIDNameModule
1.3.6.1.4.1.6486.801.1.2.1.10.5.1alcatelIND1BGPMIBALCATEL-IND1-BGP-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1alcatelIND1BGPMIBObjectsALCATEL-IND1-BGP-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14alaBgpPeer6TableALCATEL-IND1-BGP-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1alaBgpPeer6EntryALCATEL-IND1-BGP-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.65alaBgpPeer6KeepAliveConfiguredALCATEL-IND1-BGP-MIB