All MIBs › ALCATEL-IND1-BGP-MIB › alaBgpPeer6HoldTime
alaBgpPeer6HoldTime
Module: ALCATEL-IND1-BGP-MIB
OID (symbolic): ALCATEL-IND1-BGP-MIB::alaBgpPeer6HoldTime
OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.61
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in alaBgpPeer6HoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the session has not been established with the peer, or, the value of alaBgpPeer6HoldTimeConfigured is zero (0).
What is alaBgpPeer6HoldTime?
A read-only integer (0 or 3-65535 seconds) showing the negotiated hold-timer value. Engineers see 180 seconds (3 minutes) as typical hold-timer after session establishment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.61 snmpwalk -v2c -c public <target> ALCATEL-IND1-BGP-MIB::alaBgpPeer6HoldTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.61.1 snmpget -v2c -c public <target> ALCATEL-IND1-BGP-MIB::alaBgpPeer6HoldTime.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> alaBgpPeer6HoldTime.1
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-BGP-MIB::alaBgpPeer6HoldTime OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6486 | alcatel | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801 | alcatelIND1BaseMIB | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1 | alcatelIND1Management | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2 | managementIND1Software | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1 | softwareIND1Entities | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1.10 | softentIND1Routing | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1.10.5 | routingIND1Bgp | ALCATEL-IND1-BASE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.10.5.1 | alcatelIND1BGPMIB | ALCATEL-IND1-BGP-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1 | alcatelIND1BGPMIBObjects | ALCATEL-IND1-BGP-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14 | alaBgpPeer6Table | ALCATEL-IND1-BGP-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1 | alaBgpPeer6Entry | ALCATEL-IND1-BGP-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.61 | alaBgpPeer6HoldTime | ALCATEL-IND1-BGP-MIB |