AIRESPACE-WIRELESS-MIB :: bsnGlobalDot11bInputsForDCA

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAIRESPACE-WIRELESS-MIBbsnGlobalDot11bInputsForDCA

bsnGlobalDot11bInputsForDCA

Module: AIRESPACE-WIRELESS-MIB

OID (symbolic): AIRESPACE-WIRELESS-MIB::bsnGlobalDot11bInputsForDCA

OID (numeric): 1.3.6.1.4.1.14179.2.3.2.1.6

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute is a bit mask specifying what to include in
 DCA optimization.Below is a list of parameters and their 
 corresponding bits identifiers.
        options                         bit
        --------------------------------------
        none                             0
        SIGNAL STRENGTH                  1
        NOISE                            2
        FOREIGN INTERFERENCE             4
        LOAD                             8
        DEVICE INTERFERENCE             32
Default value is 63( all bits on).

What is bsnGlobalDot11bInputsForDCA?

Stores a bitmask that selects which RF environmental factors, such as interference sources or load metrics, are fed into the 802.11b Dynamic Channel Assignment optimization algorithm. Each bit corresponds to a specific input parameter that influences channel selection decisions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14179.2.3.2.1.6
snmpwalk -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnGlobalDot11bInputsForDCA

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.14179.2.3.2.1.6.1
snmpget -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnGlobalDot11bInputsForDCA.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.14179.2.3.2.1.6.1 i <value>

Start monitoring Cisco (Airespace) Wireless LAN Controllers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AIRESPACE-WIRELESS-MIB::bsnGlobalDot11bInputsForDCA OID value, configure state conditions and alerts, and monitor any Cisco (Airespace) Wireless LAN Controllers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.14179airespaceAIRESPACE-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.14179.2bsnWirelessAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3bsnGlobalDot11AIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3.2bsnGlobalDot11bAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3.2.1bsnGlobalDot11bConfigAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3.2.1.6bsnGlobalDot11bInputsForDCAAIRESPACE-WIRELESS-MIB