AIRESPACE-WIRELESS-MIB :: bsnGlobalDot11bDynamicTransmitPowerControl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAIRESPACE-WIRELESS-MIBbsnGlobalDot11bDynamicTransmitPowerControl

bsnGlobalDot11bDynamicTransmitPowerControl

Module: AIRESPACE-WIRELESS-MIB

OID (symbolic): AIRESPACE-WIRELESS-MIB::bsnGlobalDot11bDynamicTransmitPowerControl

OID (numeric): 1.3.6.1.4.1.14179.2.3.2.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Dynamic transmit power (DTP) has three modes. When the mode is auto, the transmit power of each Airespace AP will be periodically updated for all Airespace APs that permit this operation. When the DTP is runOnce,transmit power update will occur based on the UPDATE_CMD received from the management. When the DTP is static, no dynamic transmit power updates occur and their global defaults are used. Default is auto.

What is bsnGlobalDot11bDynamicTransmitPowerControl?

This setting controls the operating mode of the Dynamic Transmit Power (DTP) algorithm for 802.11b access points, with options including automatic (continuous periodic updates), run-once, or off. In automatic mode the controller periodically adjusts the transmit power of each access point that permits remote power control.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14179.2.3.2.1.9
snmpwalk -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnGlobalDot11bDynamicTransmitPowerControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.14179.2.3.2.1.9.1
snmpget -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnGlobalDot11bDynamicTransmitPowerControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.14179.2.3.2.1.9.1 i <value>

Start monitoring Cisco (Airespace) Wireless LAN Controllers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AIRESPACE-WIRELESS-MIB::bsnGlobalDot11bDynamicTransmitPowerControl OID value, configure state conditions and alerts, and monitor any Cisco (Airespace) Wireless LAN Controllers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.14179airespaceAIRESPACE-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.14179.2bsnWirelessAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3bsnGlobalDot11AIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3.2bsnGlobalDot11bAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3.2.1bsnGlobalDot11bConfigAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3.2.1.9bsnGlobalDot11bDynamicTransmitPowerControlAIRESPACE-WIRELESS-MIB