AIRESPACE-WIRELESS-MIB :: bsnGlobalDot11aInputsForDTP

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAIRESPACE-WIRELESS-MIBbsnGlobalDot11aInputsForDTP

bsnGlobalDot11aInputsForDTP

Module: AIRESPACE-WIRELESS-MIB

OID (symbolic): AIRESPACE-WIRELESS-MIB::bsnGlobalDot11aInputsForDTP

OID (numeric): 1.3.6.1.4.1.14179.2.3.3.1.15

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute is a bit mask specifying what to include in
 DCA optimization.Below is a list of parameters and their 
 corresponding bits identifiers.
        options                         bit
        --------------------------------------
        none                             0
        LOAD                             1
        SIGNAL STRENGTH                  2
        FOREIGN INTERFERENCE             4
        NOISE                            8
Default value is 15( all bits on).

What is bsnGlobalDot11aInputsForDTP?

A bitmask that controls which environmental factors are taken into account when the Dynamic Channel Assignment (DCA) optimization algorithm runs for 802.11a radios. Each bit corresponds to a specific input parameter that can be included or excluded from the optimization.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14179.2.3.3.1.15
snmpwalk -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnGlobalDot11aInputsForDTP

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.14179.2.3.3.1.15.1
snmpget -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnGlobalDot11aInputsForDTP.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.14179.2.3.3.1.15.1 i <value>

Start monitoring Cisco (Airespace) Wireless LAN Controllers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AIRESPACE-WIRELESS-MIB::bsnGlobalDot11aInputsForDTP OID value, configure state conditions and alerts, and monitor any Cisco (Airespace) Wireless LAN Controllers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.14179airespaceAIRESPACE-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.14179.2bsnWirelessAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3bsnGlobalDot11AIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3.3bsnGlobalDot11aAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3.3.1bsnGlobalDot11aConfigAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.3.3.1.15bsnGlobalDot11aInputsForDTPAIRESPACE-WIRELESS-MIB