AIRESPACE-WIRELESS-MIB :: bsnDot11StationTrapControlMask

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAIRESPACE-WIRELESS-MIBbsnDot11StationTrapControlMask

bsnDot11StationTrapControlMask

Module: AIRESPACE-WIRELESS-MIB

OID (symbolic): AIRESPACE-WIRELESS-MIB::bsnDot11StationTrapControlMask

OID (numeric): 1.3.6.1.4.1.14179.2.6.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This mask describes what events merit traps to network 
    management. If the bit for a particular event is turned on
    then notification will be generated on event occurence.
        Event                    corresponding value
        -----                    -----------------
        bsnDot11StationDisassociate           1
        bsnDot11StationDeauthenticate         2
        bsnDot11StationAuthenticateFail       4
        bsnDot11StationAssociateFail          8
        bsnDot11StationBlacklisted            16
        bsnDot11StationAssociate              32
        ciscoLwappDot11ClientMovedToRunState  64

By Default all bits are off.

What is bsnDot11StationTrapControlMask?

A bitmask that determines which client station events (such as association, disassociation, or authentication failures) will generate SNMP trap notifications. Setting a bit to 1 enables trap generation for the corresponding event type.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14179.2.6.1.1
snmpwalk -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnDot11StationTrapControlMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.14179.2.6.1.1.1
snmpget -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnDot11StationTrapControlMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.14179.2.6.1.1.1 i <value>

Start monitoring Cisco (Airespace) Wireless LAN Controllers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AIRESPACE-WIRELESS-MIB::bsnDot11StationTrapControlMask OID value, configure state conditions and alerts, and monitor any Cisco (Airespace) Wireless LAN Controllers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.14179airespaceAIRESPACE-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.14179.2bsnWirelessAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.6bsnTrapAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.6.1bsnTrapControlAIRESPACE-WIRELESS-MIB
1.3.6.1.4.1.14179.2.6.1.1bsnDot11StationTrapControlMaskAIRESPACE-WIRELESS-MIB