All MIBs › AIRESPACE-WIRELESS-MIB › bsnCustomSignatureEnable
bsnCustomSignatureEnable
Module: AIRESPACE-WIRELESS-MIB
OID (symbolic): AIRESPACE-WIRELESS-MIB::bsnCustomSignatureEnable
OID (numeric): 1.3.6.1.4.1.14179.2.3.1.42.3.1.11
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object configures the status of a particular Custom signature on LWAPP APs, for use in performing signature analysis on the received 802.11 data and/or management frames.
A value of 'true' makes the Controller send the 'Signature Add LWAPP Message' to all the joined APs with the status field set to 'enable'. This makes the joined APs perform signature analysis on the received 802.11 data and/or management frames and report the discrepancies observed, if any, to the Controller.
A value of 'false' makes the Controller send the 'Signature Add LWAPP Message' to all the joined APs with the status field set to 'disable'. The joined APs doesn't perform the signature analysis on the received 802.11 data and/or management frames for this particular signature, till the signature is enabled.
What is bsnCustomSignatureEnable?
Configures or reports whether a specific custom signature is active and being sent to LWAPP APs for packet analysis. Setting this to true causes the controller to push the signature to APs so they apply it when inspecting received 802.11 frames.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14179.2.3.1.42.3.1.11 snmpwalk -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnCustomSignatureEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14179.2.3.1.42.3.1.11.1 snmpget -v2c -c public <target> AIRESPACE-WIRELESS-MIB::bsnCustomSignatureEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.14179.2.3.1.42.3.1.11.1 s <value>
Start monitoring Cisco (Airespace) Wireless LAN Controllers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AIRESPACE-WIRELESS-MIB::bsnCustomSignatureEnable OID value, configure state conditions and alerts, and monitor any Cisco (Airespace) Wireless LAN Controllers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14179 | airespace | AIRESPACE-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14179.2 | bsnWireless | AIRESPACE-WIRELESS-MIB |
| 1.3.6.1.4.1.14179.2.3 | bsnGlobalDot11 | AIRESPACE-WIRELESS-MIB |
| 1.3.6.1.4.1.14179.2.3.1 | bsnGlobalDot11Config | AIRESPACE-WIRELESS-MIB |
| 1.3.6.1.4.1.14179.2.3.1.42 | bsnSignatureConfig | AIRESPACE-WIRELESS-MIB |
| 1.3.6.1.4.1.14179.2.3.1.42.3 | bsnCustomSignatureTable | AIRESPACE-WIRELESS-MIB |
| 1.3.6.1.4.1.14179.2.3.1.42.3.1 | bsnCustomSignatureEntry | AIRESPACE-WIRELESS-MIB |
| 1.3.6.1.4.1.14179.2.3.1.42.3.1.11 | bsnCustomSignatureEnable | AIRESPACE-WIRELESS-MIB |