ADTRAN-DSUIQ-MIB :: adDSUIQDteFlowControlOption

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsADTRAN-DSUIQ-MIBadDSUIQDteFlowControlOption

adDSUIQDteFlowControlOption

Module: ADTRAN-DSUIQ-MIB

OID (symbolic): ADTRAN-DSUIQ-MIB::adDSUIQDteFlowControlOption

OID (numeric): 1.3.6.1.4.1.664.2.141.3.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Determines how the IQ device will respond to congestion during DBU operation. If set for none, the IQ will drop frames during DBU operation when severe congestion occurs. If set for hardware, the IQ will vary the DTE TC clock in order to control the amount of data offered to the IQ when severe congestion occurs. FECN/BECN mode will set the FECN bit in outbound frames and set BECN bit for inbound frames leaving flow control up to the DTE devices.

What is adDSUIQDteFlowControlOption?

This OID selects the congestion handling method when the device handles dial backup unit traffic and the buffer becomes severely congested. Network engineers choose this based on whether connected DTE devices can handle clock variation or prefer frame drops; FECN/BECN delegates control to end devices. Setting this to hardware means the device slows down the DTE clock to prevent frame loss instead of dropping frames when congested.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.664.2.141.3.12
snmpwalk -v2c -c public <target> ADTRAN-DSUIQ-MIB::adDSUIQDteFlowControlOption

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.664.2.141.3.12.1
snmpget -v2c -c public <target> ADTRAN-DSUIQ-MIB::adDSUIQDteFlowControlOption.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.664.2.141.3.12.1 i <value>

Start monitoring ADTRAN DSU IQ data service units (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADTRAN-DSUIQ-MIB::adDSUIQDteFlowControlOption OID value, configure state conditions and alerts, and monitor any ADTRAN DSU IQ data service units (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.664adtranADTRAN-ACTDAXL3-MIB
1.3.6.1.4.1.664.2adMgmtADTRAN-ACTDAXL3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.664.2.141adDSUIQmgADTRAN-DSUIQ-MIB
1.3.6.1.4.1.664.2.141.3adDSUIQDtePortConfigADTRAN-DSUIQ-MIB
1.3.6.1.4.1.664.2.141.3.12adDSUIQDteFlowControlOptionADTRAN-DSUIQ-MIB