All MIBs › ADTRAN-DSUDPP-MIB › adDSUDPdteCSOptions
adDSUDPdteCSOptions
Module: ADTRAN-DSUDPP-MIB
OID (symbolic): ADTRAN-DSUDPP-MIB::adDSUDPdteCSOptions
OID (numeric): 1.3.6.1.4.1.664.2.8.3.2.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Configures CS signal lead on primary DTE
What is adDSUDPdteCSOptions?
This controls the Clear to Send (CS) signal behavior: force on, follow Request to Send, on with Carrier Detect, etc. Different settings accommodate different terminal wiring. Value 1 always asserts CS; value 2 follows RTS.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.664.2.8.3.2.6 snmpwalk -v2c -c public <target> ADTRAN-DSUDPP-MIB::adDSUDPdteCSOptions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.664.2.8.3.2.6.1 snmpget -v2c -c public <target> ADTRAN-DSUDPP-MIB::adDSUDPdteCSOptions.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.664.2.8.3.2.6.1 i <value>
Start monitoring ADTRAN DSU DPP data service units (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADTRAN-DSUDPP-MIB::adDSUDPdteCSOptions OID value, configure state conditions and alerts, and monitor any ADTRAN DSU DPP data service units (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.664 | adtran | ADTRAN-ACTDAXL3-MIB |
| 1.3.6.1.4.1.664.2 | adMgmt | ADTRAN-ACTDAXL3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.664.2.8 | adDSUDPmg | ADTRAN-DSUDPP-MIB |
| 1.3.6.1.4.1.664.2.8.3 | adDSUDPprov | ADTRAN-DSUDPP-MIB |
| 1.3.6.1.4.1.664.2.8.3.2 | adDSUDPprovDte | ADTRAN-DSUDPP-MIB |
| 1.3.6.1.4.1.664.2.8.3.2.6 | adDSUDPdteCSOptions | ADTRAN-DSUDPP-MIB |