ADTRAN-AOSDOWNLOAD :: adAOSDownloadErrorStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ADTRAN-AOSDOWNLOAD › adAOSDownloadErrorStatus

adAOSDownloadErrorStatus

Module: ADTRAN-AOSDOWNLOAD

OID (symbolic): ADTRAN-AOSDOWNLOAD::adAOSDownloadErrorStatus

OID (numeric): 1.3.6.1.4.1.664.5.53.1.3.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object:

corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at adAOSDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts. hardwareError - there was a hardware problem on the agent that forced an abort of the download (see adAOSDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the adAOSDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of adAOSDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.

What is adAOSDownloadErrorStatus?

This read-only integer reports the error code from the download attempt (TFTP-based codes). Check this after download to diagnose failures. Zero means success; non-zero indicates specific failure type.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.664.5.53.1.3.1.1.8
snmpwalk -v2c -c public <target> ADTRAN-AOSDOWNLOAD::adAOSDownloadErrorStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.664.5.53.1.3.1.1.8.1
snmpget -v2c -c public <target> ADTRAN-AOSDOWNLOAD::adAOSDownloadErrorStatus.1

Start monitoring ADTRAN NetVanta/SDG-series AOS devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADTRAN-AOSDOWNLOAD::adAOSDownloadErrorStatus OID value, configure state conditions and alerts, and monitor any ADTRAN NetVanta/SDG-series AOS devices from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.664adtranADTRAN-ACTDAX-MIB
1.3.6.1.4.1.664.5adSharedADTRAN-MIB
1.3.6.1.4.1.664.5.53adGenAOSADTRAN-AOS
1.3.6.1.4.1.664.5.53.1adGenAOSCommonADTRAN-AOS
Numeric OIDNameModule
1.3.6.1.4.1.664.5.53.1.3adAOSDownloadADTRAN-AOSDOWNLOAD
1.3.6.1.4.1.664.5.53.1.3.1adAOSDownloadTableADTRAN-AOSDOWNLOAD
1.3.6.1.4.1.664.5.53.1.3.1.1adAOSDownloadEntryADTRAN-AOSDOWNLOAD
1.3.6.1.4.1.664.5.53.1.3.1.1.8adAOSDownloadErrorStatusADTRAN-AOSDOWNLOAD