ADSL2-LINE-MIB :: adsl2SCStatusTssi

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsADSL2-LINE-MIBadsl2SCStatusTssi

adsl2SCStatusTssi

Module: ADSL2-LINE-MIB

OID (symbolic): ADSL2-LINE-MIB::adsl2SCStatusTssi

OID (numeric): 1.3.6.1.2.1.10.238.1.2.2.1.6

Node type: OBJECT-TYPE

Type: Adsl2Tssi

Access: read-only

Description: The transmit spectrum shaping (TSSi) breakpoints expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 octets with the following structure: First 2 octets - Index of the subcarrier used in the context of

the breakpoint. Third octet - The shaping parameter at the breakpoint. Subcarrier index is an unsigned number in the range 1 to either NSCds (downstream direction) or NSCus (upstream direction). The shaping parameter value is in the range 0 to 127 (units of -0.5dB). The special value 127 indicates that the subcarrier is not transmitted.

What is adsl2SCStatusTssi?

This OID stores transmit spectrum shaping breakpoints negotiated during handshake, as pairs of subcarrier indices and power values, defining how the modem masks its transmitted spectrum to avoid interference. Engineers examine this to verify compliance with regulation (FCC masks, ETSI masks) and to detect misconfiguration in spectrum shaping. Breakpoints at subcarrier 64 with shaping value 150 tell the modem to start rolling off power at that frequency.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.238.1.2.2.1.6
snmpwalk -v2c -c public <target> ADSL2-LINE-MIB::adsl2SCStatusTssi

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.238.1.2.2.1.6.1
snmpget -v2c -c public <target> ADSL2-LINE-MIB::adsl2SCStatusTssi.1

Start monitoring ADSL2/ADSL2+ DSLAMs and CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSL2-LINE-MIB::adsl2SCStatusTssi OID value, configure state conditions and alerts, and monitor any ADSL2/ADSL2+ DSLAMs and CPE modems from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.238adsl2MIBADSL2-LINE-MIB
1.3.6.1.2.1.10.238.1adsl2ADSL2-LINE-MIB
1.3.6.1.2.1.10.238.1.2adsl2StatusADSL2-LINE-MIB
1.3.6.1.2.1.10.238.1.2.2adsl2SCStatusTableADSL2-LINE-MIB
1.3.6.1.2.1.10.238.1.2.2.1adsl2SCStatusEntryADSL2-LINE-MIB
1.3.6.1.2.1.10.238.1.2.2.1.6adsl2SCStatusTssiADSL2-LINE-MIB