All MIBs › ADSL2-LINE-MIB › adsl2SCStatusAttainableRate
adsl2SCStatusAttainableRate
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2SCStatusAttainableRate
OID (numeric): 1.3.6.1.2.1.10.238.1.2.2.1.17
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Maximum Attainable Data Rate. The maximum net data rate currently attainable by the ATU-C transmitter and ATU-R receiver (when referring to downstream direction) or by the ATU-R transmitter and ATU-C receiver (when referring to upstream direction). Value is coded in bits/second. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated.
What is adsl2SCStatusAttainableRate?
This unsigned 32-bit value stores the maximum achievable net data rate in bits per second based on the line's current attenuation, noise, and channel conditions determined by the most recent DELT diagnostic. Engineers check this to understand the true capacity of the line and set realistic service expectations; the value updates after each diagnostic procedure runs. Example: a value of 24000000 bits/second means the line can theoretically reach 24 Mbps under current conditions, but may support less if noise increases.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.238.1.2.2.1.17 snmpwalk -v2c -c public <target> ADSL2-LINE-MIB::adsl2SCStatusAttainableRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.238.1.2.2.1.17.1 snmpget -v2c -c public <target> ADSL2-LINE-MIB::adsl2SCStatusAttainableRate.1
Start monitoring ADSL2/ADSL2+ DSLAMs and CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSL2-LINE-MIB::adsl2SCStatusAttainableRate OID value, configure state conditions and alerts, and monitor any ADSL2/ADSL2+ DSLAMs and CPE modems from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.2 | adsl2Status | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.2.2 | adsl2SCStatusTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.2.2.1 | adsl2SCStatusEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.2.2.1.17 | adsl2SCStatusAttainableRate | ADSL2-LINE-MIB |