All MIBs › ADSL2-LINE-MIB › adsl2SCStatusActAtp
adsl2SCStatusActAtp
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2SCStatusActAtp
OID (numeric): 1.3.6.1.2.1.10.238.1.2.2.1.18
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Actual Aggregate Transmit Power from the ATU (ATU-R on downstream direction and ATU-C on upstream direction), at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (physical values are -31 to 31 dBm). A value of all 1's indicates the measurement is out of range to be represented. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated.
What is adsl2SCStatusActAtp?
This signed 32-bit value (-310 to 310 in 0.1dB units) represents the aggregate transmit power in dBm emitted by the ATU at measurement time, ranging physically from -31 to +31 dBm. Engineers monitor this to ensure the ATU is not saturated (always at maximum power) or too weak, and to diagnose power-related instability or link failures. Example: a value of 200 units means the ATU is transmitting at +20dBm; if it stays at 310 (maximum), the ATU may be struggling or misconfigured.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.238.1.2.2.1.18 snmpwalk -v2c -c public <target> ADSL2-LINE-MIB::adsl2SCStatusActAtp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.238.1.2.2.1.18.1 snmpget -v2c -c public <target> ADSL2-LINE-MIB::adsl2SCStatusActAtp.1
Start monitoring ADSL2/ADSL2+ DSLAMs and CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSL2-LINE-MIB::adsl2SCStatusActAtp OID value, configure state conditions and alerts, and monitor any ADSL2/ADSL2+ DSLAMs and CPE modems from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.2 | adsl2Status | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.2.2 | adsl2SCStatusTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.2.2.1 | adsl2SCStatusEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.2.2.1.18 | adsl2SCStatusActAtp | ADSL2-LINE-MIB |