All MIBs › ADSL2-LINE-MIB › adsl2LineStatusPwrMngState
adsl2LineStatusPwrMngState
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2LineStatusPwrMngState
OID (numeric): 1.3.6.1.2.1.10.238.1.1.1.1.8
Node type: OBJECT-TYPE
Type: Adsl2PowerMngState
Access: read-only
Description: The current power management state. One of four possible power management states: L0 - Synchronized and full transmission (i.e., Showtime). L1 - Low Power with reduced net data rate (G.992.2 only). L2 - Low Power with reduced net data rate (G.992.3 and G.992.4 only). L3 - No power. The various possible values are: l0(1), l1(2), l2(3), or l3(4).
What is adsl2LineStatusPwrMngState?
This read-only OID reports the line's current power state: L0 (full-speed Showtime), L1 (reduced speed, G.992.2 only), L2 (reduced speed, G.992.3/G.992.4), or L3 (powered down and idle). NOC staff monitor this to detect lines stuck in low-power states when they should be in Showtime, usually indicating configuration or environmental problems. For example, if it shows l3(4), the line is off; if l0(1), the line is synchronized and carrying traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.238.1.1.1.1.8 snmpwalk -v2c -c public <target> ADSL2-LINE-MIB::adsl2LineStatusPwrMngState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.238.1.1.1.1.8.1 snmpget -v2c -c public <target> ADSL2-LINE-MIB::adsl2LineStatusPwrMngState.1
Start monitoring ADSL2/ADSL2+ DSLAMs and CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSL2-LINE-MIB::adsl2LineStatusPwrMngState OID value, configure state conditions and alerts, and monitor any ADSL2/ADSL2+ DSLAMs and CPE modems from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1 | adsl2Line | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1.1 | adsl2LineTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1.1.1 | adsl2LineEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1.1.1.8 | adsl2LineStatusPwrMngState | ADSL2-LINE-MIB |