All MIBs › ADSL2-LINE-MIB › adsl2LineCmndConfLdsf
adsl2LineCmndConfLdsf
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2LineCmndConfLdsf
OID (numeric): 1.3.6.1.2.1.10.238.1.1.1.1.4
Node type: OBJECT-TYPE
Type: Adsl2LineLdsf
Access: read-write
Description: Loop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end ATU on this line or only be responsive to loop diagnostics initiated by the far-end ATU.
This object MUST be maintained in a persistent manner. However, in case the operator forces loop diagnostics mode then the access node should reset the object (inhibit) when loop diagnostics mode procedures are completed.
What is adsl2LineCmndConfLdsf?
This read-write OID tells the near-end modem to force itself into loop diagnostics mode, running comprehensive line tests immediately rather than waiting for the far end to request them. Technicians use this to troubleshoot noisy or unstable loops without coordinating with remote equipment. For example, setting it to true starts diagnostics on the modem; the modem then automatically clears the flag when testing completes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.238.1.1.1.1.4 snmpwalk -v2c -c public <target> ADSL2-LINE-MIB::adsl2LineCmndConfLdsf
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.238.1.1.1.1.4.1 snmpget -v2c -c public <target> ADSL2-LINE-MIB::adsl2LineCmndConfLdsf.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.238.1.1.1.1.4.1 s <value>
Start monitoring ADSL2/ADSL2+ DSLAMs and CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSL2-LINE-MIB::adsl2LineCmndConfLdsf OID value, configure state conditions and alerts, and monitor any ADSL2/ADSL2+ DSLAMs and CPE modems from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1 | adsl2Line | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1.1 | adsl2LineTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1.1.1 | adsl2LineEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1.1.1.4 | adsl2LineCmndConfLdsf | ADSL2-LINE-MIB |