All MIBs › ADSL2-LINE-MIB › adsl2LineCmndAutomodeColdStart
adsl2LineCmndAutomodeColdStart
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2LineCmndAutomodeColdStart
OID (numeric): 1.3.6.1.2.1.10.238.1.1.1.1.6
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Automode cold start forced. This parameter is defined in order to improve testing of the performance of ATUs supporting automode when it is enabled in the MIB. Change the value of this parameter to 'true' indicates a change in loop conditions applied to the devices under test. The ATUs shall reset any historical information used for automode and for shortening G.994.1 handshake
and initialization.
Automode is the case where multiple operation-modes are enabled through the adsl2LConfProfAtuTransSysEna object in the line configuration profile being used for the ADSL line, and where the selection of the actual operation-mode depends not only on the common capabilities of both ATUs (as exchanged in G.994.1), but also on achievable data rates under given loop conditions.
This object MUST be maintained in a persistent manner.
What is adsl2LineCmndAutomodeColdStart?
This read-write boolean OID, when set to true, forces the modem to forget all automode history and restart the G.994.1 handshake as if freshly connected, simulating a plug-unplug cycle. Lab and field technicians use this to test whether the modem can re-negotiate the best transmission mode from scratch without corrupting connection state. For example, setting it to true during testing confirms that a modem can recover proper speed negotiation even after previous bad connections.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.238.1.1.1.1.6 snmpwalk -v2c -c public <target> ADSL2-LINE-MIB::adsl2LineCmndAutomodeColdStart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.238.1.1.1.1.6.1 snmpget -v2c -c public <target> ADSL2-LINE-MIB::adsl2LineCmndAutomodeColdStart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.238.1.1.1.1.6.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> adsl2LineCmndAutomodeColdStart.1
Start monitoring ADSL2/ADSL2+ DSLAMs and CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSL2-LINE-MIB::adsl2LineCmndAutomodeColdStart OID value, configure state conditions and alerts, and monitor any ADSL2/ADSL2+ DSLAMs and CPE modems from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1 | adsl2Line | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1.1 | adsl2LineTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1.1.1 | adsl2LineEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.1.1.1.6 | adsl2LineCmndAutomodeColdStart | ADSL2-LINE-MIB |