All MIBs › ADSL2-LINE-MIB › adsl2LConfProfTargetSnrmUs
adsl2LConfProfTargetSnrmUs
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2LConfProfTargetSnrmUs
OID (numeric): 1.3.6.1.2.1.10.238.1.5.1.2.1.16
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The minimum Noise Margin the ATU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (physical values are 0 to 31 dB).
What is adsl2LConfProfTargetSnrmUs?
This parameter defines the minimum upstream noise margin in 0.1 dB increments (0-310 units, representing 0-31 dB) required during line initialization. Administrators adjust this to ensure the connection starts with predictable upstream stability. For example, a target of 50 (5 dB) ensures the modem will not complete initialization with an upstream signal quality worse than 5 dB margin.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5 | adsl2Profile | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1 | adsl2ProfileLine | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2 | adsl2LineConfProfTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1 | adsl2LineConfProfEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.16 | adsl2LConfProfTargetSnrmUs | ADSL2-LINE-MIB |