All MIBs › ADSL2-LINE-MIB › adsl2LConfProfRaUsTimeUs
adsl2LConfProfRaUsTimeUs
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2LConfProfRaUsTimeUs
OID (numeric): 1.3.6.1.2.1.10.238.1.5.1.2.1.10
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The Upstream Up-Shift Time Interval, to be used when adsl2LConfProfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should stay above the Upstream Up-Shift Noise Margin before the ATU-C shall attempt to increase the upstream net data rate. The time interval ranges from 0 to 16383 seconds.
What is adsl2LConfProfRaUsTimeUs?
This parameter specifies the time interval (0 to 16,383 seconds) the upstream noise margin must stay above a threshold before the modem increases upstream speed. You would adjust this setting to prevent the connection from speeding up too quickly when conditions improve, reducing the risk of reconnections. A value of 120 seconds means the modem waits 2 minutes of sustained good conditions before attempting to boost upload speed.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5 | adsl2Profile | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1 | adsl2ProfileLine | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2 | adsl2LineConfProfTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1 | adsl2LineConfProfEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.10 | adsl2LConfProfRaUsTimeUs | ADSL2-LINE-MIB |