All MIBs › ADSL2-LINE-MIB › adsl2LConfProfRaUsTimeDs
adsl2LConfProfRaUsTimeDs
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2LConfProfRaUsTimeDs
OID (numeric): 1.3.6.1.2.1.10.238.1.5.1.2.1.9
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The Downstream Up-Shift Time Interval, to be used when adsl2LConfProfRaModeDs is set to dynamicRa. The interval of
time that the downstream noise margin should stay above the Downstream Up-Shift Noise Margin before the ATU-R shall attempt to increase the downstream net data rate. The time interval ranges from 0 to 16383 seconds.
What is adsl2LConfProfRaUsTimeDs?
This parameter stores the time (in seconds, 0 to 16,383) that the downstream noise margin must remain above a threshold before the modem attempts to increase downstream speed. Network engineers configure this to control how aggressively the modem ramps up data rates when line conditions improve. For example, a value of 60 means the modem will wait for 60 consecutive seconds of good signal conditions before trying to speed up the download connection.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5 | adsl2Profile | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1 | adsl2ProfileLine | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2 | adsl2LineConfProfTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1 | adsl2LineConfProfEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.9 | adsl2LConfProfRaUsTimeDs | ADSL2-LINE-MIB |