All MIBs › ADSL2-LINE-MIB › adsl2LConfProfRaUsNrmDs
adsl2LConfProfRaUsNrmDs
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2LConfProfRaUsNrmDs
OID (numeric): 1.3.6.1.2.1.10.238.1.5.1.2.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The Downstream Up-Shift Noise Margin value, to be used when adsl2LConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is above this value and stays above it for more than the time specified by the adsl2LConfProfRaUsTimeDs, the ATU-R shall attempt to increase the downstream net data rate. The Downstream Up-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (physical values are 0 to 31 dB).
What is adsl2LConfProfRaUsNrmDs?
This OID stores a noise margin threshold for downstream speed increases, measured in 0.1 dB units (range 0-310, or 0-31 dB physical). When the noise margin exceeds this threshold and stays there, the modem attempts to raise the downstream speed. For example, a value of 100 (10 dB) means the modem tries to boost speed only when the downstream signal quality indicates a 10 dB margin.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5 | adsl2Profile | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1 | adsl2ProfileLine | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2 | adsl2LineConfProfTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1 | adsl2LineConfProfEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.7 | adsl2LConfProfRaUsNrmDs | ADSL2-LINE-MIB |