All MIBs › ADSL2-LINE-MIB › adsl2LConfProfRaDsTimeDs
adsl2LConfProfRaDsTimeDs
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2LConfProfRaDsTimeDs
OID (numeric): 1.3.6.1.2.1.10.238.1.5.1.2.1.13
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The Downstream Down-Shift Time Interval, to be used when adsl2LConfProfRaModeDs is set to dynamicRa. The interval of time the downstream noise margin should stay below the Downstream Down-Shift Noise Margin before the ATU-R shall attempt to decrease the downstream net data rate. The time interval ranges from 0 to 16383 seconds.
What is adsl2LConfProfRaDsTimeDs?
This OID specifies how long (0 to 16,383 seconds) the downstream noise margin must stay below its threshold before the modem actually reduces speed. This hysteresis prevents the connection from constantly switching speeds in marginal conditions. For example, setting this to 120 means poor conditions must persist for at least 2 minutes before the modem cuts downstream speed.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5 | adsl2Profile | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1 | adsl2ProfileLine | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2 | adsl2LineConfProfTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1 | adsl2LineConfProfEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.13 | adsl2LConfProfRaDsTimeDs | ADSL2-LINE-MIB |