All MIBs › ADSL2-LINE-MIB › adsl2LConfProfMaxAggRxPwrUs
adsl2LConfProfMaxAggRxPwrUs
Module: ADSL2-LINE-MIB
OID (symbolic): ADSL2-LINE-MIB::adsl2LConfProfMaxAggRxPwrUs
OID (numeric): 1.3.6.1.2.1.10.238.1.5.1.3.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: The maximum upstream aggregate receive power over the relevant set of sub-carriers. The ATU-C should verify that the upstream power cutback is such that this maximum aggregate receive power value is honored. It ranges from -255 to 255 units of 0.1 dBm (physical values are -25.5 to 25.5 dBm). A value of 0x7FFFFFFF (2147483647) means that there is no limit.
What is adsl2LConfProfMaxAggRxPwrUs?
This signed integer (−255 to 255 in units of 0.1 dBm, or 2147483647 for no limit) caps the maximum upstream receive power per sub-carrier to prevent receiver overload. A network engineer sets this to protect the modem's receive circuitry from overly strong upstream signals caused by nearby transmitters. For example, a value of 50 means the receiver will not accept signals stronger than 5 dBm; a value of 2147483647 disables the limit.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.238 | adsl2MIB | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1 | adsl2 | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5 | adsl2Profile | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1 | adsl2ProfileLine | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.3 | adsl2LineConfProfModeSpecTable | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.3.1 | adsl2LineConfProfModeSpecEntry | ADSL2-LINE-MIB |
| 1.3.6.1.2.1.10.238.1.5.1.3.1.6 | adsl2LConfProfMaxAggRxPwrUs | ADSL2-LINE-MIB |