ADN-ENV-MIB :: adnRdssGatTableTraverseStartKey

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsADN-ENV-MIBadnRdssGatTableTraverseStartKey

adnRdssGatTableTraverseStartKey

Module: ADN-ENV-MIB

OID (symbolic): ADN-ENV-MIB::adnRdssGatTableTraverseStartKey

OID (numeric): 1.3.6.1.4.1.637.3.1.8.5.100.1.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This key is used for the purpose of distributing the entries from the GAT table when a SWBB subsystem has just register (just came up) with Routes Distribution. The Start Key is the key to the first entry sent on the previous message to aid in the scenario when retransmission of the previous message is required. Set Start key to NULL to indicate completed table has been sent, or table is empty. Set Start Key to KEY {Root} to start traversal. Set Start Key equal to End Key to indicate GAT table traversal is completed.

What is adnRdssGatTableTraverseStartKey?

This read-only INTEGER marks the key to the first GAT table entry sent in the previous distribution message, used to resume transmission if retransmission is needed or to signal completion (NULL/0x00). Network engineers review this during table synchronization failures to determine which entries have already been sent and where to restart if a message was lost. If the start key is NULL, the engineer knows the entire table has been successfully distributed to that subsystem.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.637.3.1.8.5.100.1.1.16
snmpwalk -v2c -c public <target> ADN-ENV-MIB::adnRdssGatTableTraverseStartKey

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.637.3.1.8.5.100.1.1.16.1
snmpget -v2c -c public <target> ADN-ENV-MIB::adnRdssGatTableTraverseStartKey.1

Start monitoring Frame Relay access equipment (FRANP signalling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADN-ENV-MIB::adnRdssGatTableTraverseStartKey OID value, configure state conditions and alerts, and monitor any Frame Relay access equipment (FRANP signalling) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.637alcatelADN-MIB
1.3.6.1.4.1.637.3adnADN-MIB
1.3.6.1.4.1.637.3.1adnMIBADN-MIB
1.3.6.1.4.1.637.3.1.8adnEnvironmentADN-MIB
1.3.6.1.4.1.637.3.1.8.5adnEnvHssADN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.637.3.1.8.5.100adnRdssMIBADN-ENV-MIB
1.3.6.1.4.1.637.3.1.8.5.100.1adnRdssRegistrationTableADN-ENV-MIB
1.3.6.1.4.1.637.3.1.8.5.100.1.1adnRdssRegistrationEntryADN-ENV-MIB
1.3.6.1.4.1.637.3.1.8.5.100.1.1.16adnRdssGatTableTraverseStartKeyADN-ENV-MIB