ADN-ENV-MIB :: adnMsupPrintInterface

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsADN-ENV-MIBadnMsupPrintInterface

adnMsupPrintInterface

Module: ADN-ENV-MIB

OID (symbolic): ADN-ENV-MIB::adnMsupPrintInterface

OID (numeric): 1.3.6.1.4.1.637.3.1.8.5.13.3.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is a bitmap that enables to activate the
  printing of MSUP exchanges on the CU craft interface.
    
  bit  
  val  meaning
  ---  -------------------------------------------------------
  1    displays exchanges with SMSUP
  2    displays exchanges with ATMSUP
  4    displays exchanges with APSUP
  8    displays exchanges with CUSUP
 16    displays exchanges with NMGS in fixed format
 32    displays exchanges with FLS
 64    displays exchanges with Debug Manager
128    displays traps sent to SFAS
256    displays localization service messages

What is adnMsupPrintInterface?

This OID is a bitmap that controls verbose logging of MSUP module-to-module communication on the control unit's console, with each bit corresponding to a different protocol module. Network engineers enable specific bits to watch traffic between modules like ATM support, analog support, or coupler modules when debugging message flow. Setting this to "2" enables logging of ATMSUP exchanges, so you see every message between the ATM and MSUP modules in real time.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.637.3.1.8.5.13.3.1
snmpwalk -v2c -c public <target> ADN-ENV-MIB::adnMsupPrintInterface

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.637.3.1.8.5.13.3.1.1
snmpget -v2c -c public <target> ADN-ENV-MIB::adnMsupPrintInterface.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.637.3.1.8.5.13.3.1.1 i <value>

Start monitoring Frame Relay access equipment (FRANP signalling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADN-ENV-MIB::adnMsupPrintInterface OID value, configure state conditions and alerts, and monitor any Frame Relay access equipment (FRANP signalling) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.637alcatelADN-MIB
1.3.6.1.4.1.637.3adnADN-MIB
1.3.6.1.4.1.637.3.1adnMIBADN-MIB
1.3.6.1.4.1.637.3.1.8adnEnvironmentADN-MIB
1.3.6.1.4.1.637.3.1.8.5adnEnvHssADN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.637.3.1.8.5.13adnMsupToolBoxEnvMIBADN-ENV-MIB
1.3.6.1.4.1.637.3.1.8.5.13.3adnMsupPrintMIBADN-ENV-MIB
1.3.6.1.4.1.637.3.1.8.5.13.3.1adnMsupPrintInterfaceADN-ENV-MIB