All MIBs › ADN-ENV-MIB › adnAtmBoardDefSignalling
adnAtmBoardDefSignalling
Module: ADN-ENV-MIB
OID (symbolic): ADN-ENV-MIB::adnAtmBoardDefSignalling
OID (numeric): 1.3.6.1.4.1.637.3.1.8.5.5.20.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates the defect signalling in addition to the report towards the control unit (CU). It is coded as a bit map. The various bit positions are:
1 : ERI (error indicator, bit inserted in the active maintenance cells to warn neighbour boards that an error is detected), 2 : P-FERF or RDI-P (path section far end received failure indication sent to the origin of the defect), 4 : MS-FERF or RDI-L (multiplexing section far end received failure indication sent to the origin of the defect), 8 : ATM-AIS (alarm indication signal is sent on a line defect towards the network handler dealing with VP/VC AIS management), 16 : RAI (remote alarm indication), 32 : RLED (the status led must be set permanent red).
What is adnAtmBoardDefSignalling?
This read-write bitmapped value controls which additional signaling mechanisms are activated when a defect occurs on the board. Network engineers enable specific bits to choose how the board communicates defects—through error indicators in maintenance cells, path failure indicators, or other signals. A value of 3 (binary 11) might enable both ERI (error indicator bit) and P-FERF (path far-end-receive-failure) signaling simultaneously.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.637.3.1.8.5.5.20.1.8 snmpwalk -v2c -c public <target> ADN-ENV-MIB::adnAtmBoardDefSignalling
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.637.3.1.8.5.5.20.1.8.1 snmpget -v2c -c public <target> ADN-ENV-MIB::adnAtmBoardDefSignalling.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.637.3.1.8.5.5.20.1.8.1 i <value>
Start monitoring Frame Relay access equipment (FRANP signalling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADN-ENV-MIB::adnAtmBoardDefSignalling OID value, configure state conditions and alerts, and monitor any Frame Relay access equipment (FRANP signalling) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.637 | alcatel | ADN-MIB |
| 1.3.6.1.4.1.637.3 | adn | ADN-MIB |
| 1.3.6.1.4.1.637.3.1 | adnMIB | ADN-MIB |
| 1.3.6.1.4.1.637.3.1.8 | adnEnvironment | ADN-MIB |
| 1.3.6.1.4.1.637.3.1.8.5 | adnEnvHss | ADN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.637.3.1.8.5.5 | adnNodeSupervisionEnvMIB | ADN-ENV-MIB |
| 1.3.6.1.4.1.637.3.1.8.5.5.20 | adnAtmBoardDefTable | ADN-ENV-MIB |
| 1.3.6.1.4.1.637.3.1.8.5.5.20.1 | adnAtmBoardDefEntry | ADN-ENV-MIB |
| 1.3.6.1.4.1.637.3.1.8.5.5.20.1.8 | adnAtmBoardDefSignalling | ADN-ENV-MIB |