All MIBs › ACMEPACKET2-ENVMON-MIB › apSysRedundancy
apSysRedundancy
Module: ACMEPACKET2-ENVMON-MIB
OID (symbolic): ACMEPACKET2-ENVMON-MIB::apSysRedundancy
OID (numeric): 1.3.6.1.4.1.9148.3.2.1.1.4
Node type: OBJECT-TYPE
Type: ApRedundancyState
Access: read-only
Description:
In redundancy set, one SD is active, one is standby. If there is no redundancy set, the value is 'other(3)'.
What is apSysRedundancy?
This OID shows the redundancy status, indicating whether the device has an active and standby partner or if redundancy is not configured. Engineers check this to verify that high-availability setup is working correctly before a failure occurs. For example, 'active-standby' means one device is live and another is ready to take over immediately if needed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9148.3.2.1.1.4 snmpwalk -v2c -c public <target> ACMEPACKET2-ENVMON-MIB::apSysRedundancy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9148.3.2.1.1.4.1 snmpget -v2c -c public <target> ACMEPACKET2-ENVMON-MIB::apSysRedundancy.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9148 | acmepacket | ACMEPACKET-SMI |
| 1.3.6.1.4.1.9148.3 | acmepacketMgmt | ACMEPACKET-SMI |
| 1.3.6.1.4.1.9148.3.2 | apSystemManagementModule | ACMEPACKET2-ENVMON-MIB |
| 1.3.6.1.4.1.9148.3.2.1 | apSysMgmtMIBObjects | ACMEPACKET2-ENVMON-MIB |
| 1.3.6.1.4.1.9148.3.2.1.1 | apSysMgmtMIBGeneralObjects | ACMEPACKET2-ENVMON-MIB |
| 1.3.6.1.4.1.9148.3.2.1.1.4 | apSysRedundancy | ACMEPACKET2-ENVMON-MIB |