All MIBs › ACC-CM › accCmSwDialType
accCmSwDialType
Module: ACC-CM
OID (symbolic): ACC-CM::accCmSwDialType
OID (numeric): 1.3.6.1.4.1.5.1.1.64.6.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Signaling type of the dialing interface
What is accCmSwDialType?
This OID identifies the signaling protocol used by the switching fabric (such as QSIG, SS7, or SIP) to route and control calls internally within the communication manager. A network engineer checks this to verify that internal switch signaling is compatible with endpoints and to investigate setup delays caused by signaling protocol mismatches. An example value might be 1 for QSIG, showing which internal protocol the switch uses.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.64.6.1.8 snmpwalk -v2c -c public <target> ACC-CM::accCmSwDialType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.64.6.1.8.1 snmpget -v2c -c public <target> ACC-CM::accCmSwDialType.1
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-CM::accCmSwDialType OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5.1.1.64 | accCmGroup | ACC-CM |
| 1.3.6.1.4.1.5.1.1.64.6 | accCmSwCallTable | ACC-CM |
| 1.3.6.1.4.1.5.1.1.64.6.1 | accCmSwCallEntry | ACC-CM |
| 1.3.6.1.4.1.5.1.1.64.6.1.8 | accCmSwDialType | ACC-CM |